Kobe Range Hoods How to Perform Kobe Range Hood Light Replacement for Optimal Performance

Page 17

To Replace Light Bulb

CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.

￿

￿

 

￿

 

￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.Make sure all controls are off, and range hood is unplugged.

2.Place a flat-head screwdriver between light cover and housing ￿ to remove cover ￿.

3.Gently pull defective bulb straight out ￿ and discard. Light bulbs should be 12V 20W maximum.

4.Wear a cotton glove or use a cloth to handle the replacement bulb (do not handle with bare fingers as this may shorten the life of the bulb). Push gently but securely into light socket.

NOTE: DO NOT PUSH TOO HARD AS BULB “LEGS” MAY BREAK OFF.

5.Replace light cover ￿.

6.Turn range hood ON to test for operation.

14

Image 17
Contents Kobe Brand Range Hood This page Left Purposely Blank Read and Save These Instructions ContentsPage Page Must keep all material for returns or refunds Components of PackageFor Wall Mount with Optional Duct Cover InstallationFor Under the Cabinet Installation Table of Contents Make Sure Hood is Secure Before Releasing Under the Cabinet InstallationF E T Y W a R N I N G Page Hood Preparation Before Installation Wall Mount InstallationWall Duct Cover Installation Turn OFF Turn onMaintenance To Replace Light Bulb Specifications Measurements & Diagrams For Under T HE Cabinet Page Rear Knockout Holes For Wall Mount with Optional Duct Cover Baffle Filter & Stainless Steel Spacers Parts List Optional Duct Cover Sold Separately Blower Assembly Electrical Assembly Processor Board Circuit Diagram Model NO. CH0030SQB CH0036SQBModel NO. CH0042SQB CH0048SQB Processor BoardClaims will not be Accepted After the Allocated Days DisclaimerWarranty Certificate WarrantyTWO-YEAR Warranty Service Period ConditionsImplied WARRANTIES/STATE LAW ServiceConsequential Damage Record the Following Information for Your Record Product RegistrationThis page Left Purposely Blank VER.070601