Kobe Range Hoods CH0036SQB manual Disclaimer, Claims will not be Accepted After the Allocated Days

Page 31

DISCLAIMER

1.CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING DELIVERY. NOTE ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS RECEIPT. REQUEST NAME AND SIGNATURE OF THE CARRIER’S AGENT AND KEEP COPY TO SUPPORT YOUR CLAIM.

Upon acceptance of items, owner assumes responsibility for its safe arrival. Report damages to the carrier and file a claim immediately. Failure to do so may result in the denial of your claim. The carrier will furnish you with necessary forms for filing a claim.

DAMAGES CAUSED DURING TRANSIT ARE NOT COVERED UNDER OUR WARRANTY.

2.PLEASE INSPECT CONTENTS OF PACKAGE(S) CAREFULLY UPON RECEIVING!

We must be notified in writing of any damages and/or missing parts within the allocated days upon your receipt of package(s). Contact your local KOBE dealer or distributor or call KOBE for the time limit.

CLAIMS WILL NOT BE ACCEPTED AFTER THE ALLOCATED DAYS.

NOTE: ITEMS WERE THOROUGHLY TESTED AND CAREFULLY PACKED IN OUR FACTORY BEFORE SHIPPING.

3.Products must be returned in good working condition with ALL original parts and documentation packed in ALL original cartons, fillers and shipping cartons. A restocking fee of 25% will be charged for all approved return(s).

EXCHANGES OR RETURNS MAY NOT BE ACCEPTED IF ANY PACKAGING IS MISSING.

4.MAKE SURE TO INSPECT THE HOOD FOR DAMAGES AND DEFECTS BEFORE INSTALLATION. Appearance flaws of the hood found after installation and not affecting hood performance is not covered under our warranty for returns or exchanges. Service visits not covered under warranty will carry a service charge.

A)Before Installation: Return for exchange or refund (please see above for acceptable returns).

B)After Installation: NO exchange or refund.

28

Image 31
Contents Kobe Brand Range Hood This page Left Purposely Blank Read and Save These Instructions ContentsPage Page Must keep all material for returns or refunds Components of PackageFor Under the Cabinet InstallationFor Wall Mount with Optional Duct Cover Installation Table of Contents Make Sure Hood is Secure Before Releasing Under the Cabinet InstallationF E T Y W a R N I N G Page Hood Preparation Before Installation Wall Mount InstallationWall Duct Cover Installation Turn OFF Turn onMaintenance To Replace Light Bulb Specifications Measurements & Diagrams For Under T HE Cabinet Page Rear Knockout Holes For Wall Mount with Optional Duct Cover Baffle Filter & Stainless Steel Spacers Parts List Optional Duct Cover Sold Separately Blower Assembly Electrical Assembly Processor Board Circuit Diagram Model NO. CH0030SQB CH0036SQBModel NO. CH0042SQB CH0048SQB Processor BoardClaims will not be Accepted After the Allocated Days DisclaimerConditions WarrantyWarranty Certificate TWO-YEAR Warranty Service PeriodConsequential Damage ServiceImplied WARRANTIES/STATE LAW Record the Following Information for Your Record Product RegistrationThis page Left Purposely Blank VER.070601