Fitting the hob to the worktop

Carry out the installation of the hob as follows (follow also the instructions given on the “Assembly and cut outlines” supplied with the appliance):

1)measure the worktop for the exact positioning of the hob;

2)make the holes for the gas and electric pipe outlet and the safety holes to block the hob to the worktop (follow the instructions given on the “Assembly and cut outlines” - see fig. 1);

3)screw the traction pins supplied with the appliance into the holes situated under the hob and adjust their height (according to the worktop height);

4)place the hob on the worktop (paying attention to insert the traction pins into the safety holes of the worktop - fig. 1);

5)push the hob ahead towards the back of the worktop, and fix it to the worktop (fig. 2).

	3
	3
	1
	2
	1
	2
FO 2537	Fig. 1

1 - Holes for the gas and electric pipe outlet

2 - Safety holes to block the hob to the

worktop

3 - Traction pins

FO 2538

Fig. 2