Zanussi ZKC6010 user manual Replacing an oven light bulb

Page 26

Replacing an oven light bulb

•The type of bulb required is a 300°C 25 watt small Edison Screw.

WARNING!

Disconnect the appliance from the electricity supply before replacing the bulb.

•Make sure the appliance is cool before replacing the bulb.

•Open the door and remove the shelves.

•Remove the glass cover by turning it to the left.

•Unscrew the bulb by turning it to the left.

•Fit a new bulb and then replace the glass bulb cover.

•Replace the shelves.

•Restore the electricity supply.

Image 26

Contents User Manual Cooker Contents Child safety Important safety instructionsInstallation During useCleaning and maintenance Extreme care must be taken when using a ceramic hob scraperProduct description Controls and their functionsCondensation and steam Before using the applianceRating plate CookwareGrill and oven furniture Hob Using the hobHints and tips when using the hob Recommended saucepansGrill Using the grillGrill settings are as follows Things to noteButton on Grill pan and handleTo Remove. Press Slide the handle Towards the rightFood should be turned over during cooking as required Grilling chartHints and tips To fit the top oven shelf Using the top ovenTop oven Hints and tips Main oven Slight increase in cooking time may be necessary Oven cooking chart Oven cooking chart Roasting chart 160 180 CUsing defrost DefrostMain oven light Using main oven lightUsing slow cook Slow cookThaw thoroughly before cooking Food preparation slow cookingGeneral points Care and cleaning To reduce marking of the hob Avoid the useInner door glass is removable for cleaning Cleaning the doorsAerosol cleaners must not be used on Stay- clean surfaces Household detergents and bleachesTop Oven To remove the glassTo replace the door glass Main OvenReplacing an oven light bulb Type of bulb required is a 300C 25 watt small Edison ScrewOven is not cooking evenly TroubleshootingGrill and ovens do not work Oven light fails to illuminate Oven fan is noisyThis appliance must be earthed Installation instructionsConnecting to the electricity supply Ensure that the cover is securely fastened Ensure all screws are securely tightenedTechnical data EnvironmentGuarantee / Customer care Standard guarantee conditions349134601 04/2007