Zanussi ZVT65X manual What to do if, Environment concerns, Problem, Possible cause and remedy

Page 8

Warning! Sharp objects and abrasive cleaning agents will damage the appliance.

For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.

Scratches or dark stains on the glass ceramic have no effect on how the appliance operates.

Removing the dirt:

1.Remove immediately: melting plastic, plastic foil, and food containing sugar. Use a special glass

ceramic scraper. Put the scraper on the glass ce- ramic surface at an acute angle and slide the blade on the surface.

Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shi- ny metallic discolorations. Use a special cleaner for glass ceramic or stainless steel.

2.Clean the appliance with a damp cloth and some de- tergent.

3.At the end rub the appliance dry with a clean cloth.

What to do if...

Problem

You cannot start the appliance or op- erate it.

The residual heat indicator does not come on.

A sound operates and appliance starts and stops again. After 5 seconds one more sound operates.

comes on.

and a number come on.

Possible cause and remedy

You touched 2 or more sensor fields at the same time. Only touch one sensor field.

There is water or fat stains on the control panel. Clean the control panel

The child safety device operates . Stop the function. See the section “Child safety device”.

Start the appliance again and set the heat setting in 10 seconds.

The cooking zone is not hot because it operated only for a short time. If the cooking zone must be hot, speak to the after sales service.

You covered . Uncover the sensor field.

The automatic switch-off operates. Stop the appliance and start it again. Overheating protection for the cooking zone operates. Stop the cooking zone and start it again.

There is an error in the appliance.

Disconnect the appliance from the electrical supply for some time. Discon-

nect the fuse from the electrical system of the house. Connect again. If comes on again, speak to the after sales service.

If you tried the above solutions and cannot repair the problem, speak to your dealer or the Customer Care De- partment. Give the data from the rating plate, three-digit- letter code for the glass ceramic (it is in the corner of the cooking surface) and an error message that comes on.

If you operated the appliance incorrectly, the servicing by a customer service technician or dealer will not be free of charge, even during the warranty period. The instructions about the customer service and conditions of guarantee are in the guarantee booklet.

Environment concerns

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical

8

and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate

Image 8
Contents ZVT65X Installation ContentsSafety information Safety instructions Assembly Displays and sounds tell which functions are started Description of the applianceUse the sensor fields to operate the appliance Automatic Switch Off times Operating the applianceCare and cleaning Helpful hints and tipsProblem What to do ifEnvironment concerns Possible cause and remedyPackaging material Page Page 892930729-A-032009