Zanussi ZCM 611 manual Fitting the Stability Bracket Not supplied, Connecting to Gas

Page 21

 

 

300 mm.

 

 

WALL FACE

 

 

 

 

 

 

 

BACK OF COOKER

580 mm.

mm.

 

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

 

STABILITY BRACKET

 

100

 

 

 

 

 

 

 

 

A

BASE OF COOKER

 

 

 

 

 

PENCIL LINE ON THE FLOOR

 

 

 

 

 

295 mm.

 

 

 

PLAN VIEW OF THE COOKER

 

SIDE VIEW

FO 0179

 

OF THE COOKER

 

 

 

 

Fig. 2

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted. (See "Important Safety Requirements").

If a stability bracket should be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 295mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 17) and remove cooker from its position. Mark off 580mm (23") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig. 3. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

If using different types of gas bayonet connection, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

600

 

 

450

 

130

FO 0180

Fig. 3

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Mixed Fuel Cooker Important Safety Information Description of the Cooker ContentsControl Panel AccessoriesOven Cavity Fitting the Splash backHob burners ControlsBefore the First Use of the Cooker Electric OvenOven Function Control Knob Thermostat Control KnobSetting the time of day Hour Clock and TimerThings to note Setting the timerNight dimming function Child Safety FunctionHints and Tips Condensation and steam Using the OvenCookware Effects of dishes on cooking resultsHow to Use the Fan Oven Using the Fan OvenCooking Chart Things to NoteRoasting Chart Meat TemperaturesHints and Tips Defrosting How to Use DefrostingHints and Tips Always Cook Thoroughly Immediately After ThawingGrilling How to Use the GrillHob Top Maintenance and CleaningPan Supports BurnersCleaning materials Cleaning the OvenExternal cleaning Oven lamp replacementService and Spare Parts Symptom SolutionSomething not working Zanussi Guarantee Conditions Guarantee ConditionsCustomer Care Department Customer Care DepartmentImportant Safety Requirements Instructions for the InstallerPositioning the Appliance Fig Positioning the CookerFitting the Stability Bracket Not supplied Connecting to GasElectrical connections Permanent ConnectionThis Cooker Must be Earthed Conversion from Natural Gas to LPG CommissioningCustomer Care

ZCM 611 specifications

The Zanussi ZCM 611 is a versatile and highly efficient cooking appliance that brings convenience and performance to your kitchen. This gas cooking range is designed with a variety of features that cater to the needs of both amateur cooks and culinary enthusiasts alike.

One of the standout features of the Zanussi ZCM 611 is its four gas burners, which provide a range of heat settings for different cooking techniques. Whether you are simmering sauces, boiling pasta, or frying, the efficient burners distribute heat evenly, allowing for precise cooking. The front-left burner is particularly powerful, making it ideal for quick heating and searing.

The main body of the range is constructed from stainless steel, a material known for its durability and easy maintenance. This not only gives the appliance a sleek and modern look but also ensures that it stands up to the daily rigors of kitchen use. The enameled cast iron pan supports are another practical feature, providing a stable and robust surface for your cookware, preventing wobbling and ensuring safety during use.

The Zanussi ZCM 611 also incorporates an easy-clean design, with removable burner caps and a smooth surface that makes cleaning a breeze. This is particularly beneficial in a busy kitchen environment where quick and efficient maintenance is essential. The appliance’s control knobs are located at the front, allowing for easy access and adjustments without reaching over hot surfaces.

In addition to these features, the Zanussi ZCM 611 is equipped with an integrated oven, providing additional functionality for baking and roasting. The oven is spacious and designed for even heat distribution, ensuring that your dishes cook evenly. With several cooking programs available, users can choose the best setting for their specific dish, enhancing the overall cooking experience.

The safety features in the Zanussi ZCM 611 are also commendable, including flame failure devices that shut off the gas supply if the flame goes out, enhancing the safety of your cooking.

Overall, the Zanussi ZCM 611 is a robust choice for anyone looking to upgrade their kitchen appliances. With its combination of powerful burners, user-friendly design, easy maintenance, and safety features, it is engineered to meet the demands of everyday cooking while delivering exceptional results. For those who value quality and efficiency in their kitchen, the Zanussi ZCM 611 is a reliable and stylish option that stands out in the market.
Top Page Image Contents