Clock function
Duration
End
Application
To set how long the appliance must operate.
To set when the appliance must be deactivated.
You can use Duration and End at the same time to set the time when the appliance
must be activated and then deactivated. First set Duration, then End.
Setting the clock functions
1.For Duration and End , set an oven function and temperature. This is not nec- essary for the Minute Minder .
2.Press the Selection button again and again until the indicator for the necessary clock function flashes.
Using the accessories
3.Press + or - to set the necessary clock function.
The display shows the indicator for the clock function you set. When the set time ends, the indicator flashes and an acoustic signal sounds for two minutes.
With the Duration and End func- tions, the appliance deactivates automati-
cally.
4.Press a button to stop the signal.
5.Turn the knob for the oven functions and the knob for the temperature to the off po- sition.
Cancelling the clock functions
1.Press the Selection button again and again until the necessary function indicator flash- es.
2.Press and hold the button
The clock function goes out after some seconds.
Warning! Refer to the Safety chapters.
Inserting the oven accessories
Put in the
The deep roasting pan and the oven shelf have double side edges. These edges and the shape of the
safety for the oven accessories.
8 | www.zanussi.com |