Installation, Problem Possible cause

Problem		Possible cause
		The clock is not set.
		The necessary settings are not set.
		The automatic switch-off is on.
		The Child lock is on.
		The fuse in the fuse box is released.
The oven lamp does not oper-		The oven lamp is defective.
ate.
Steam and condensation col-		You left the dish in the appliance for too
lect on the food and in the ap-		long.
pliance.
The display shows	or	Demo mode is on.

,the appliance does not heat up and there is no air circula- tion.

The display shows the error	There is an electronic error.
code "F...".

Set the clock.

Do a check of the settings.

Refer to "Automatic switch-off".

Refer to "Deactivating the Child Lock".

Do a check of the fuse.

If the fuse is released more than one time, contact a qualified electrician.

Do not let the dishes stay in the appli- ance for longer than 15-20 minutes after the cooking is completed.

Deactivate the appliance. Press for approximately 2 seconds. An acoustic signal sounds. Press and hold the but-

tons and at the same time until the acoustic signal sounds and the indi- cator goes out.

Write down the error code and contact the Service Centre.

If you cannot find a solution to the problem yourself, con- tact your dealer or the service centre.

We recommend that you write the data here:

The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity.

Model (MOD.).........................................

Product number (PNC).........................................

Serial number (S.N.).........................................

Installation

Warning! Refer to "Safety information" chapter.