Installation under a cooktop | Electrical supply |
The following KÜPPERSBUSCH
oven: |
Model: | „A“ |
| „B“ |
| „C“ | |||
|
|
|
|
|
|
|
|
|
EKE 854.1 |
|
|
|
|
|
|
|
|
EKE 854.2 |
|
| 103 mm |
| ³ 80 mm |
| ³ | |
EKE 804.2 |
|
|
|
| ||||
|
|
|
|
|
| |||
EKE 604.2 |
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
EGS 304.0* | 97 mm |
| ³ 80 mm |
| ³ | |||
|
|
|
|
|
|
| ||
EKS 304.1* | 85 mm |
| ³ 65 mm |
| ³ | |||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
EKS 604.2 |
|
| 103 mm |
| ³ 80 mm |
| ³ | |
EKS 804.2 |
|
|
|
| ||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Φ* The gap between the countertop and the front panel is not necessary for the models EGS 304.2 and EKS 304.1.
ΦYou will find the recess size and installation conditions for the cooktop in the installation instructions for the cooktop.
=Only a qualified technian can install a conduit box or replace a connection cable.
Conduit box
Don’t install the conduit box in the installation area or above a worktop!
Attach it to the side, underneath the wall, or in a high cabinet under the in- stallation surface.
There must be a hole for the conduit cable in either the bottom opening or the wall.
Electrical supply
The power supply should be a 120/240 volts system,
Electrical diagram
for a 120 / 240 volts system,
Be sure to install an appropriate conduit box (not furnished) to connect the oven.
Don’t shorten the conduit to facilitate service! The conduit should be routed to permit the removal of the oven.
Installation, electrical connections and grounding must comply with all appli- cable local codes.
■The
Connected load | 240 V, 60 Hz, 3.6 kW |
Fuse current | 15 A |
– Connect the cable to the conduit box.
ΦWhen the oven is connected, the clock flashes! Set the time as described in the user’s guide.
Installation
Inserting the appliance
–Push the appliance right into the cabinet opening. Don’t pinch the appliance cable!
Fastening the appliance
– Open the oven door and attach the appliance with the enclosed screws - inserted at an angle - to the cabinet element from the inside out.
4 | Installation instructions EEB 6800.0 / EEB 6600.0 / EEB 6500.0 |
