Zanussi ZYB992 Clock functions, Heat indicator, Rapid Heat-up function, Residual Heat function

Oven Function

Pyro

Heat indicator

The Heat indicator shows in the display. It increases slowly and shows how high the temperature gets.

Rapid Heat-up function

With the Rapid Heat-up function you decrease the pre- heating time. You can use it with each cooking function.

Important! Do not put the food into the oven, until the Rapid Heat-up function is completed.

1.Set an oven function.

If necessary, change the recommended temperature.

2.Press . The display shows "FHU" and the Rapid Heat-up function operates.

Application

To remove stubborn dirt.

3.When the Rapid Heat-up function is completed, an acoustic signal sounds and "FHU" goes out.

The appliance continues to operate using the set oven function and oven temperature.

4.Put the food in the oven.

Residual Heat function

With Duration function, the oven automatically switches off some minutes before the time period is completed. The oven uses the residual heat to complete the cooking with- out energy consumption.

Important! Residual heat function is applicable only if the Duration is more than 15 minutes.

Clock functions

Clock function

Time of day

Minute minder

Duration

End

Application

Shows the time. To set, change or check the time.

To set a countdown time.

A signal sounds, after the time period is completed.

This function has no effect on the operation of the oven.

To set how long the oven has to be in operation.

To set the switch-off time for an oven function.

Duration and End can be used at the same time, if the oven is to be switched on and off auto-

matically later. In this case first set Duration , then End .

8