2
1 |
3After cleaning, install the glass panel in opposite order. Make sure you put the glass panel in the rub- ber distance holders.
Catalytic panels
1Pull the front of the shelf rail away from the side wall.
Hold the rear shelf rails and catalytic panel with the other hand.
2Pull the rear shelf rail away from the side wall and remove it
The catalytic panels are
• Discolouration of the catalytic surface has no ef- fect on the catalytic properties.
•To prevent damage to the catalytic surface, do not to clean the catalytic panels with oven sprays, abrasive cleaners, soap or other cleaning agents.
Removable shelf rails and catalytic panels
To clean the oven cavity remove the shelf rails and cata- lytic panels.
Caution! Be careful when you remove the shelf rails. The catalytic panels are not attached to the oven
cavity and can fall out when you remove the shelf rails.
12
Installing the shelf rails
Install the shelf rails in opposite sequence.
Make sure that the rounded ends of the shelf rails point to the front.
Oven ceiling
You can remove the heating element on the oven ceiling to clean the oven ceiling easily.
Warning! Before you remove the heating element switch off the appliance. Make sure that the
appliance is cold. There is a risk of burns!
1 Unscrew the screw | 2 Carefully pull the heat- |
which holds the heating | ing element downwards. |
element. For the first time, | The oven ceiling is ready |
use a screwdriver. | to clean. |
Clean the oven ceiling with a soft cloth with warm water and cleaning agent and let it dry.
Installing the heating element
1. Install the heating element in opposite sequence.
Warning! Make sure that the heating element is correctly installed and it does not fall down.