Replacing the oven light bulb/cleaning the glass cover
Warning! Be careful! There is the risk of electrical shock!
1.Turn the glass cover
2.Clean the glass cover.
3.Replace the oven light bulb with applicable 300°C
4.Install the glass cover.
What to do if…
Warning! Refer to "Safety information" chapter.
Problem
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on the food and in the oven cavity
The display shows “12.00”
Possible cause
The oven is not switched on
The clock is not set
The necessary settings are not set
The fuse in the fuse box is released
The oven lamp is defective
You left the dish in the oven for too long
A power cut
Remedy
Switch on the oven Set the clock Control the settings
Control the fuse. If the fuse is re- leased more than one time, refer to a qualified electrician.
Replace the oven lamp
Do not leave the dishes in the oven for longer than
Reset the clock
If you cannot find a solution to the problem yourself, contact your dealer or the service centre.
We recommend that you write the data here: Model (MOD.)
Product number (PNC) Serial number (S.N.)
The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity.
.........................................
.........................................
.........................................
Installation
Warning! Refer to "Safety information" chapter.
13