What to do if…

1 2

7Carefully lift (step 1) and remove (step 2) the panel of glass.

Clean the glass panel with water and soap. Dry the glass panel carefully.

Installing the door and the glass panel

When you install the panel with a decorative frame, make sure that the screen-printing zone looks to the inner side

of the door. Make sure that after the installation the sur- face of the glass panel frame on the screen-printing zones is not rough when you touch it.

Make sure that you install the internal panel of glass in the seats correctly (refer to the illustration).

Warning! Refer to "Safety information" chapter.

Problem

The appliance does not heat up.

The oven lamp does not operate.

Steam and condensation settle on the food and in the appliance.

Possible cause

The appliance is deactivated.

The fuse in the fuse box is released.

The oven lamp is defective.

You left the dish in the appliance for too long.

Remedy

Activate the appliance. Refer to "Daily use".

Do a check of the fuse. If the fuse is released more than one time, contact a qualified electrician.

Replace the oven lamp.

Do not let the dishes stay in the ap- pliance for more than 15-20 minutes after the cooking ends.

If you cannot find a solution to the problem yourself, con- tact your dealer or the service centre.

We recommend that you write the data here: Model (MOD.)

Product number (PNC) Serial number (S.N.)

The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity.

.........................................