Venting Installation, Installation Precautions

OWNER’S MANUAL

CAST IRON STOVE AND B-VENT BURNER SYSTEM ASSEMBLY

Continued

6.Reattach bottom cover to rear cover with 8 screws removed in step 2 on page 8 (see Figure 18, page 7). Make sure that you don’t pinch any wires during reassembly.

WARNING: A qualified in- staller or service person must connect burner system to gas supply. Follow all local codes.

VENTING INSTALLATION

WARNING: Read all instruc- tions completely and thoroughly before attempting installation. Fail- ure to do so could result in serious injury, property damage, or loss of life. Operation of improperly in-

The following actions will void the war- ranty on your venting system:

•Installation of any damaged venting component

•Unauthorized modification of the vent- ing system

•Installation of any component part not manufactured or approved by DESA International

•Installation other than as instructed by these instructions

Your burner system is approved for use with any listed gas vent. A listed gas vent is a factory made and listed system designed, and installed exclusively for removing products of combus- tion, excess air, and dilution air resulting from burning fuel gas. Metal vents, the most com- mon type of vent, employ double wall con- struction enclosing an insulating air space. This air space both helps keep flue gases warm and reduce heat transferred to nearby combus- tibles. This appliance is equipped with a safety control system designed to protect against improper venting of combustion products.

It is very important that the venting system maintain its balance between the combus- tion air intake and the flue gas exhaust. Certain limitations apply to vent configura-

•Venting instruction contained in this manual may or may not apply to your area. Consult your local authority for re- quirement in your area.

•Where the gas vent extends through ac- cessible spaces, it should be enclosed to avoid personal contact and damage. En- closure walls should have a fire rating equal to or greater than the floors through which the gas vent passes except in single or two-family dwellings.

•Situate the gas vent in the structure so that it can be installed without cutting joists, sills, plates, or major load bearing partitions or members. It is also impor- tant to locate the base of the gas vent as near as possible to the heating appliance.

•This heater must be properly connected to a venting system. This heater is equipped with a vent safety shutoff system.

•Use only vents labeled "FOR EXTE- RIOR USE" above the roofline.

•Consult the authority having jurisdic- tion to select the correct gas vent di- ameter. Avoid using a larger than nec- essary diameter.

Round Top

stalledandmaintainedventingsys- tem could result in serious injury, property damage, or loss of life.

NOTICE: Failure to follow these instructions will void the warranty.

INSTALLATION PRECAUTIONS

Consult local building codes before begin- ning the installation. Only a qualified ser- vice person should install venting system. The installer must follow these safety rules:

•Wear gloves and safety glasses for protection

•Use extreme caution when using ladders or when on roof tops

•Be aware of electrical wiring locations in walls and ceilings

tions and must be strictly followed.

WARNING:This gas stove with burner system and vent assembly must be vented directly to the out- side. The venting system must NEVER be attached to a chimney serving a separate solid fuel burn- ing appliance.

TYPE B-VENT INSTALLATION (Listed B-0 or Greater)

Before beginning installation be sure that the overall height and gas vent size conform to building code requirements. Gas vents ex- tending through pitched roofs can extend a minimum height of at least 600 mm (2') higher than any obstruction within 3m (10'). Gas vents extending through flat roofs are required to extend at least 600 mm (2') above the roof and at least 600 mm (2') higher than any portion of the building or adjoining build- ing within 3m (10') of the gas vent.

Storm Collar

Flashing

Firestop

Spacer

Enclosure

Wall

Gas Vent Length

Support

Plate

Adjustable

Length

Roof

Support

25mm (1") Clearance to Combustible Material

Keep Electrical Wires and Building Insulation Away from Gas Vent and Out of the Required Air Space

25mm (1") Clearance to Combustibles

Figure 23 - Typical B-Vent Installation

Continued

106706

For more information, visit www.desatech.com

MSRBVP, MSRBVN specifications

Desa MSRBVN and MSRBVP are two innovative residential community projects that have garnered attention for their design, sustainability, and technological integrations. These developments aim to cater to the growing demand for modern living spaces that balance comfort, efficiency, and environmental responsibility.

One of the main features of Desa MSRBVN and MSRBVP is their careful urban planning. These communities provide an array of housing options, from single-family homes to multi-unit residences, ensuring that there is something for everyone, including families, young professionals, and retirees. The layouts are designed to maximize natural light and airflow, creating a pleasant living environment.

Sustainability is a cornerstone of both projects. The communities incorporate green building practices that reduce their carbon footprint. This includes the use of energy-efficient materials, solar panels for renewable energy generation, and greywater recycling systems that help manage water resources effectively. Landscaping is also thoughtfully designed, with native plants that require minimal irrigation and support local biodiversity.

Technologically, Desa MSRBVN and MSRBVP are at the forefront of smart living. Each home is equipped with advanced home automation systems, allowing residents to control lighting, heating, and security features remotely. Integration with mobile applications provides users with seamless access to their home systems, enhancing convenience and safety.

Safety and community are also pivotal aspects. These developments include well-lit public spaces, walking paths, and recreational areas that encourage outdoor activities and social interaction. Security measures, such as gated entries and surveillance systems, ensure that residents feel secure within their community.

In terms of connectivity, both Desa MSRBVN and MSRBVP benefit from strategic locations that offer easy access to public transportation, shopping centers, schools, and healthcare facilities. This makes daily commutes and lifestyle requirements more manageable for residents.

Overall, Desa MSRBVN and MSRBVP exemplify the future of residential living, where thoughtful design, sustainability, and technology converge to create vibrant and connected communities. As urban areas continue to evolve, such projects highlight the importance of integrating modern living solutions that prioritize residents' well-being and environmental stewardship.