Zanussi ZOB 550 user manual Telescopic Shelf Supports and Catalytic Panels, Proceed as follows

Telescopic Shelf Supports and Catalytic Panels

The shelf supports and the catalytic panels can be removed for easy cleaning.

Make sure the appliance is completely cooled before carrying out this operation.

Thesiderailswithtelescopicpull-outrunnerscanbe completelyremovedforcleaning.

)Proceed as follows:

1)remove the front screw while keeping the shelf support and the catalytic panel in position with the other hand (see diagram 1);

2)keep the shelf support and the catalytic panel in position and lift them with a hand while disengaging the rear hook. Take off the shelf support and the catalytic panel (see diagram 2);

Clean the telescopic shelf supports on the outside only with commercially available detergents.

Important: The telescopic shelf supports must not be cleaned in the dishwasher.

Attention: the rollers must not be greased.

3)once the cleaning is carried out, fit the shelf support and the catalytic panel together and mount them following the procedure in reverse.

Please, ensure the retaining nuts are secure when refitting the shelf support and the catalytic panel.

Itispossibletoremovethetelescopicrunners only, unlocking the elements as shown on page 16.

Thetelescopicrunnersmustnotbecleaned in the dishwasher.

1

2

Do not attempt to remove the telescopic runners until the oven has cooled down.

Do not competely pull out the telescopic runners to remove them from the side rails.

Sharp edges could cause injuries.

25