Zanussi ZOB 330 Electronic programmer, Setting the time of day, To set the correct time of day

Electronic programmer

4

5

6

2 1 3

Fig. 4

1.Push button for selecting a function

2.Decreasing control button “ ”

73. Increasing control button “ ”

84. Display

5.“Cooking Duration” pilot lamp

6.“End of cooking” pilot lamp

7.“Minute minder” pilot lamp

8.“Time of day” pilot lamp

The oven will only work if the time of day has been set.

However, the oven can also be operated without any programme.

Setting the time of day

When the power supply is switched on, or after a power failure, the “Time of day” pilot lamp will flash on the display.

To set the correct time of day:

1.Press button “” or “ ”.

2.After the setting is carried out, wait for 5

seconds: the “Time of day” pilot lamp will

go out and the display will show the set time. The appliance is ready for use.

To reset the correct time of day:

1.Press buttonrepeatedly to select the “Time of day” function. The relevant pilot lamp will start flashing. Then proceed as described above.

The time of day can only be reset if no automatic

function (cooking duration or end of

cooking) has been set.

In the event of a power failure, all the settings (time of day, programme setting or programme in operation) will be cancelled. When the power is restored, the numbers in the display will flash, and the clock/timer has to be reset.

8