To Cancel the Countdown

If you change your mind and want to cancel the 'Countdown', press the Selector Control button until

the 'Countdown' indicator neon ( ) flashes and then the decrease control ( - ) until 0.00 shows in the display as Fig. 5. The Countdown indicator neon ( ) will continue to flash for a few seconds and then return to the time of day.

3.SETTING THE OVEN TIMER CONTROL

The main oven only can be automatically timed. When using the timer control for the very first time, it is advisable to let it operate while you are at home. The displays can be checked to show that it is operating correctly and you will feel confident to leave a meal to cook automatically in the future.

A)TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY

i)Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 9.am. as Fig. 6.

ii)Place food in the oven.

iii)To set the length of cooking time, press the Selector Control button ( ) until the 'Cook Time' indicator neon ( ) is illuminated. Press the increase control ( + ) until the required length of cooking time is displayed, e.g. 2 hrs 15 mins as Fig. 7. If necessary depress the decrease control ( - ) until the correct time interval is achieved.

The maximum cooking time is 10 hours.

iv)Release the buttons. The 'Cook Time' indicator neon ( ) will be illuminated.

Remember, this must be completed within 5 seconds of first pressing the Selector Control button.

v)To set the 'End Time'. Press the Selector Control button until the 'End Time' indicator neon ( ) flashes. Press the increase control ( + ) until the required stop time is displayed, e.g. 12.15 p.m. as Fig. 8. If necessary press the decrease control ( - ) until the correct time interval is achieved.

vi)Release the buttons. The time of day will be displayed after 5 seconds. The 'Cook Time ( )

and 'End Time' ( ) indicator neons will be illuminated.

The 'End Time' must not be more than 23 hours 59 minutes from the time of day. For example, if the time of day is 09.00a.m., the latest 'End Time' would be 08.59a.m. the next day.

vii)Set the main oven control to the required temperature. The oven indicator neon should be OFF.

NOTE: When the automatic timed period starts, the oven indicator neon will glow. It may turn on and off during use to show that the setting is being maintained.

Fig.5.

Fig.6.

Fig.7.

Fig.8.