Zanussi TH 500 manual Installation Instructions, Electrical Connections, Electrical Requirements

Page 10

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifications or attempt to modify this product in any way.

Technical Information

 

 

DIMENSIONS

HEIGHT:

38cm

 

WIDTH

60cm

 

DEPTH

28cm

 

DEPTH WITH VISOR OPEN:

45,5cm

WEIGHT

GROSS:

14,7kg

 

NET:

12,7kg

ELECTRICAL SUPPLY:

Voltage (50Hz)

220-240 V

POWER CONSUMPTION:

 

285W

FAN MOTOR:

 

270W

LAMP:

 

15W

SUITABLE FOR INSTALLATION

 

 

ABOVE:

OVER ELECTRIC HOB:

7KW (max)

 

OVER GAS HOB:

10KW (max)

 

SLOT-IN GAS OVEN :

13.5KW (max)

 

SLOT-IN ELECTRIC COOKER:

12.4KW (max)

Note: CE Marking certifies that this appliance complies with the require- ments laid down in EEC directive 89:336. (Electromagnetic compatibility) and subsequent modifications and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

This appliance must be earthed.

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualified electrician e.g. your local Electricity Board, or a contractor who is on the role of the National Inspection Council for Electrical Installation Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

This appliance is fitted with a 3 core mains cable and must be permanently connected to the electricity supply via a double-pole switch having 3mm minimum contact gap on each pole. A Switched Fuse Connection Unit to BS.1363 Part 4, fitted with a 3A fuse, is a recommendad mains supply connection accessory to ensure compliance with the Safety Requirements applicable to fixed wiring instructions.

This appliance conforms to BS.800: 1988 and EEC Directive No. 78 308 regarding suppression of radio and television interference.

10

Image 10
Contents Integrated Cooker Hood TH Electrical Connections Installing the Cooker HoodMaintenance and Cleaning Something Not WorkingChild Safety Important Safety InformationInstallation Maintenance and ServiceCooker Hood Controls Your Appliance Operating InstructionsTo Operate Recirculation ExtractionMetal Grease Filters Maintenance and CleaningExternal Cleaning KTo remove the grease filter cassetteKReplacing the strip light KTo Remove/Replace the Charcoal FilterWorktop lighting KReplacing the strip light starterSymptom Solution Service and Spare PartsSomething not Working Standard Guarantee Conditions Peace of Mind for Twenty Four MonthsElectrical Requirements Installation InstructionsElectrical Connections Electrical ConnectionDucting Installing the Cooker HoodInstallation Requirements Clearance HeightPositioning UnpackingVenting Wall Cabinet Preparation Fitting the Wall CabinetKcabinetSecuring the cooker hood to the wall Fitting the Control Panel KTo adjust the lower casingKTo remove the front strip Page Dir /336/CEE 73/23/CEE