Zanussi TH 500 manual Your Appliance Operating Instructions, Cooker Hood Controls, To Operate

Page 4

YOUR APPLIANCE

OPERATING INSTRUCTIONS

This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam.

Cooker Hood Controls

The cooker hood functions are controlled by three slider switches which are located in a fold away control box on the right hand side. Automatic Microswitch

The microswitch overrides the controls, and switches off the hood when the visor is closed. When the visor is opened the hood will resume the function of previous setting.

Fan ON/OFF control Position 1 - Low Position 2 - Normal Position 3 - Boost

Light ON/OFF control

To Operate

Extend the visor and select the required functions. To obtain the best performance it is advisable

to switch on the hood a few minutes before you start cooking and leave it running for approximately 15 minutes after finishing.

4

Image 4
Contents Integrated Cooker Hood TH Installing the Cooker Hood Maintenance and CleaningElectrical Connections Something Not WorkingImportant Safety Information InstallationChild Safety Maintenance and ServiceCooker Hood Controls Your Appliance Operating InstructionsTo Operate Recirculation ExtractionMaintenance and Cleaning External CleaningMetal Grease Filters KTo remove the grease filter cassetteKTo Remove/Replace the Charcoal Filter Worktop lightingKReplacing the strip light KReplacing the strip light starterSymptom Solution Service and Spare PartsSomething not Working Standard Guarantee Conditions Peace of Mind for Twenty Four MonthsInstallation Instructions Electrical ConnectionsElectrical Requirements Electrical ConnectionInstalling the Cooker Hood Installation RequirementsDucting Clearance HeightPositioning UnpackingVenting Wall Cabinet Preparation Fitting the Wall CabinetKcabinetSecuring the cooker hood to the wall Fitting the Control Panel KTo adjust the lower casingKTo remove the front strip Page Dir /336/CEE 73/23/CEE