Warning | Changing the light bulb(s) |
|
•Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions.
•The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.
•Disconnect the cooker hood from the mains supply.
•Prior to touching the light bulbs ensure they are cooled down.
•Replace the old bulb with a new one of the same type.
•If the light does not come on, make sure the bulb has been inserted in correctly before contacting your local Service Force Centre.
Cleaning the hood
•Clean the outside of the hood using a damp cloth and a solution of water and mild washing up liquid.
•Never use corrosive, abrasive or flammable cleaning products or products containing bleach.
•Never insert pointed objects in the motor’s protective grid.
•Only ever clean the switch panel and filter grill using a damp cloth and mild washing up liquid.
•Clean all the plastic parts with a soft cloth soaked in warm water and neutral soap.
•It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard.
12