Zanussi ZHC 9254X user manual Fix the flue below with 2 screws 1 per side

Page 19

•Make the flue slide so that the bend of the section of the lower flue fits into the bend of the fixing bracket of the mantle (17).

Note: during this operation pull the upper flue out for a few centimetres to ease the fitting operation.

•Extract the upper flue and fix it high on flues support bracket G with 2 screws (one per side - 18).

•Fix the flue below with 2 screws (1 per side - 19).

Mount the carbon filter frame (only filtering version) and the anti-fat filter again. Connect the hood to the mains electricity and check, finally, that it is functioning well.

2 x Ø 2,9x6,5

18

18

17

19

2 x Ø 2,9x6,5

19

Image 19

Contents ZHC Page Good luck Contents Never use the hood without effectively mounted grating Safety warningsPage Description of the Appliance Extraction modeNot extract steam Recirculation mode Control Panel Hand washing Maintenance and CareMetal grease filter Removing the metal grease filterTo remove Cleaning/replacing the charcoal filterCharcoal filter FittingChanging the light bulbs Cleaning the hoodTechnical Details Mounting accessories includedElectrical connection Safety warnings for the electricianInstalling the mantle on the hood InstallationProceed as follows First decide which functioning version is better for you Assembling the deflector 3 parts only for filter versionAssembling the chimney flue support/bracket 3 parts Page Ø 3,5x9,5 Fix the flue below with 2 screws 1 per side Guarantee/Customer Service Customer Care European Guarantee Albania +35 5 4 261 Electrolux Service, St Göransgatan Page Page Page LI3FYA Ed.02/08