Zanussi ZHC 9254X user manual Control Panel

Page 9

Control Panel

Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated.

Turn the hood on a few minutes before you start cooking.

The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared.

Correct ventilation: If the cooker hood is to work correctly there must be an under pressure in the kitchen. It is important to keep the kitchen windows closed and have a window in an adjacent room open.

The control switches are located on the hood’s front panel:

Light switch

Push-button 1

Push-button 3

(ON/OFF)

(ON/OFF)

(ON/OFF)

ON/OFF

Push-button 2

motor speed key

(ON/OFF)

Light switch (ON/OFF): this switch is used to turn the light fitted in the hood on and off.

ON/OFF motor speed key: serves to enable and disenable the speed selection keys.

Push-button 1 (ON/OFF): used to set the fan to speed 1.

Push-button 2 (ON/OFF): used to set the fan to speed 2.

Push-button 3 (ON/OFF): used to set the fan to speed 3.

9

Image 9
Contents ZHC Page Good luck Contents Never use the hood without effectively mounted grating Safety warningsPage Extraction mode Description of the ApplianceNot extract steam Recirculation mode Control Panel Metal grease filter Maintenance and CareRemoving the metal grease filter Hand washingCharcoal filter Cleaning/replacing the charcoal filterFitting To removeChanging the light bulbs Cleaning the hoodTechnical Details Mounting accessories includedElectrical connection Safety warnings for the electricianInstallation Installing the mantle on the hoodProceed as follows Assembling the deflector 3 parts only for filter version First decide which functioning version is better for youAssembling the chimney flue support/bracket 3 parts Page Ø 3,5x9,5 Fix the flue below with 2 screws 1 per side Guarantee/Customer Service Customer Care European Guarantee Albania +35 5 4 261 Electrolux Service, St Göransgatan Page Page Page LI3FYA Ed.02/08