Zanussi ZHC 9254X user manual Electrical connection, Safety warnings for the electrician

Page 14

Electrical connection

Safety warnings for the electrician

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area apply a bi-polar switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III, in accordance with installation instructions.

IMPORTANT: Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled.

14

Image 14

Contents ZHC Page Good luck Contents Safety warnings Never use the hood without effectively mounted gratingPage Not extract steam Extraction modeDescription of the Appliance Recirculation mode Control Panel Removing the metal grease filter Maintenance and CareMetal grease filter Hand washingFitting Cleaning/replacing the charcoal filterCharcoal filter To removeCleaning the hood Changing the light bulbsMounting accessories included Technical DetailsSafety warnings for the electrician Electrical connectionProceed as follows InstallationInstalling the mantle on the hood Assembling the chimney flue support/bracket 3 parts Assembling the deflector 3 parts only for filter versionFirst decide which functioning version is better for you Page Ø 3,5x9,5 Fix the flue below with 2 screws 1 per side Guarantee/Customer Service Customer Care European Guarantee Albania +35 5 4 261 Electrolux Service, St Göransgatan Page Page Page LI3FYA Ed.02/08