Texas Instruments manual Description, TPA6030A4EVM Specifications

Page 11

Description

1.2 Description

The TPA6030A4 stereo 3-W audio power amplifier evaluation module is designed to demonstrate all of the different features and benefits of the TPA6030A4 amplifier. It consists of the TI TPA6030A4 stereo 3-W audio power amplifier IC along with a small number of other parts mounted on a circuit board that measures approximately 2 1/4 inches by 1 1/2 inches (Figure 1–1).

Figure 1–1. The TI TPA6030A4 Audio Amplifier Evaluation Module

Single in-line header pins extend from the underside of the module circuit board to allow the EVM to be plugged into the TI Plug-N-Play audio amplifier evaluation platform, or to be wired directly into existing circuits and equipment when used stand-alone.

The platform has room for a single TPA6030A4 evaluation module and is a convenient vehicle for demonstrating TI’s audio power amplifier and related evaluation modules. The EVM simply plugs into the platform, which automatically provides power to the modules, interconnects them correctly, and connects them to a versatile array of standard audio input and output jacks and connectors. Easy-to-use configuration controls allow the platform and EVMs to quickly model many possible end-equipment configurations.

There is nothing to build, nothing to solder, and nothing but the speakers included with the platform to hook up.

1.3 TPA6030A4EVM Specifications

Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V to 15 V Supply current, IDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 A max Continuous output power per channel, PO: 16-Ω BTL, VCC =12 V . . . . . 3 W

Audio input voltage, VI,: HP input . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.3 V LINE input . . . . . . . . . . . . . . . . . . . . . . VCC + 0.3 V Minimum load impedance, RL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ω †

† VCC = 7 V is recommended for this load.

Introduction 1-3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User’s Guide Important Notice EVM Important Notice EVM Warnings and Restrictions Information About Cautions and Warnings Read This FirstRelated Documentation From Texas Instruments Figures ContentsTables Topic IntroductionFeature Highlights Description TPA6030A4EVM SpecificationsSpecial Notes Regarding the Data Sheet Quick Start Typical TPA6030A4EVM Jumper Settings Power PrecautionsPlatform Preparations Quick Start List for PlatformModule Preparation Quick Start Module Map Quick Start List for Stand-AloneControl Inputs TPA6030A4EVM Connected for Stereo Single-Ended SE Output Reference TPA6030A4 EVM Top Layer TPA6030A4EVM Layout and SchematicTPA6030A4EVM Schematic TPA6030A4 Audio Power Amplifier Evaluation Module Parts List Volume Control

TPA6030A4 specifications

The Texas Instruments TPA6030A4 is a highly regarded audio amplifier designed for portable and battery-operated devices, providing high-quality sound reproduction while maintaining efficiency. This Class-AB amplifier is known for its compact design, making it an ideal choice for mobile applications, such as smartphones, tablets, and portable speakers.

One of the standout features of the TPA6030A4 is its ability to deliver impressive audio performance despite its small footprint. The amplifier can output up to 2.1 Watts of power per channel at a supply voltage of 5V, enabling it to drive small speakers and headphones effectively. This power output ensures that users experience rich, clear sound across a variety of audio ranges, from deep bass notes to crisp treble frequencies.

The TPA6030A4 employs advanced technology to enhance audio quality. It uses a low total harmonic distortion (THD) and noise specification, providing clear audio without the interference often found in traditional amplifiers. This precision in sound quality is essential for applications where audio fidelity is paramount, ensuring that music and voice carry the intended tone and clarity.

Another significant characteristic of the TPA6030A4 is its power efficiency. The device features a built-in shutdown mode, allowing it to conserve battery life when not in use. This functionality is particularly valuable for portable devices, where energy conservation is crucial. Furthermore, the TPA6030A4 integrates thermal shutdown protection, safeguarding the amplifier from overheating and ensuring longevity in various operating conditions.

The TPA6030A4 is designed with flexibility in mind. It can accept a wide range of supply voltages from 2.5V to 5.5V, making it adaptable to different battery configurations. Additionally, it provides straightforward and seamless integration into existing designs, with minimal external components required.

Finally, the TPA6030A4 supports stereo applications, allowing for a high-quality audio experience whether used in mono or stereo configurations. Its compact size, coupled with robust performance and efficiency, makes the TPA6030A4 an excellent choice for manufacturers looking to enhance their audio products without compromising on space or power consumption. Overall, the Texas Instruments TPA6030A4 stands out as a reliable and effective solution for modern audio amplification needs.
Top Page Image Contents