Specifications, Input 1 ~, Input 5/6 ~ 7/8 | Fostex VM08 guide

Model VM08 Owner’s Manual

Specifications

<INPUT 1 ~ 4>

Connector	: ø6mm phone jack/Un-balanced
	(x 4)
Input impedance	: 20kΩ ore more
Input level	: -50dBV ~ -6dBV

<INPUT 5/6 ~ 7/8>

Connector	: ø6mm TRS phone jack
	Un-balanced (x 2)
Input impedance	: 20kΩ ore more
Input level	: -6dBV

<STEREO OUT L, R>

Connector	: ø6mm phone jack/Un-balanced
	(x 2)
Load impedance	: 10kΩ ore more
Output level	: -10dBV

<AUX SEND 1/2>

Connector	: ø6mm TRS phone jack
	Un-balanced (x 1)
Load impedance	: 10kΩ ore more
Output level	: -10dBV

<PHONES OUT>

Connector	: ø6mm stereo phone jack (x 1)
Load impedance	: 16Ω ore more
Output Level	: 20mW (at 16Ω load)

<FOOT SWITCH>

Connector	: ø6mm phone jack (x 1)
	Model 8051 foot switch

<OTHERS>

Equalizer
HI	: 10kHz +/-18dB (shelving type)
MID	: 1kHz +/- 18dB (peaking type)
LO	: 100Hz +/- 18dB (shelving type)
Frequency response	: 20Hz ~ 20kHz (TYPICAL)
Dynamic range	: 90dB (TYPICAL)
A/D	: 20bit 64 times over sampling Δ∑
D/A	: 24bit 128 times over sampling
	Δ∑
Sampling frequency	: 44.1kHz
Total harmonic distortion : 0.01% (TYPICAL)
Crosstalk	: 70dB or more @1kHz

<GENERAL:>

Dimensions	: 300 (W)x70 (H)x212 (D) mm
Weight	: Approx. 1.2kg
DC IN	: DC9V, 650mA, AC adaptor (AD-
	9B)

*Specifications and appearance are subject to change without notice for product improvement.

<S/P DIF OUT>

Connector	: Optical (x 1)
Format	: IEC 60958 (S/P DIF)

					Block Diagram
					ST	EFF AUX
					L R	1 2	1 2
		METER					ST MASTER
INPUT 1	A/D	100Hz	1kHz	10kHz							S/P DIF OUT
INPUT 1	A/D			CH ON	PAN					D/A
(-6dBV~-50dBV)					PAN		100Hz	1kHz	10kHz	D/A	L
					GAIN						L
									CH ON	D/A	R
									CH ON	D/A	ST BUSS OUT
	TRIM	LO	MID	HI	EFF 1				ST MASTER		(-10dBV)
									ST MASTER

							LO	MID		METER
					EFF 2		LO	MID	HI		PHONES OUT
					EFF 2						PHONES
					AUX 1		AUX MASTER
CH 1					PRE/POST AUX 2				D/A
CH 1								AUX 1
CH 2								MASTER			AUX 1/2 OUT
CH 2											(-10dBV)
CH 3											(-10dBV)
CH 3
CH 4									D/A
								AUX 2
			METER					MASTER
			METER
INPUT 5/6	A/D	100Hz	1kHz	10kHz
(-6dBV)	A/D
	A/D			CH ON	PAN		EFF 1
		MONO/STEREO			GAIN		EFF 1
		LO	MID	HI	EFF 1				EFFECT 1
							EFF 1		REVERB/DELAY
							EFF 1
					EFF 2		MASTER
					EFF 2
					AUX 1			EFF MUTE
CH5/6					PRE/POST AUX 2		EFF 2
CH5/6							EFF 2
CH7/8									EFFECT 2
									EFFECT 2
							EFF 2		MODULATION/DELAY
							EFF 2
							MASTER
								EFF MUTE
					29

Image 29

Fostex VM08 owner manual Specifications, Input 1 ~, Input 5/6 ~ 7/8, AUX Send 1/2

Contents

Model Safety Instructions Table of Contents Names and Functions Status indicator Contrast adjusting knobFader adjust key Level adjust key Internal battery for the memory back up Reset of VM08Remove the insulation paper Please remember this ST.OUT L, R jack Peripheral Equipment ConnectionInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacks AUX Send OUT 1/2 jack Input 5/6 7/8 and AUX Send 1/2 jacksInput 5/6, Input 7/8 jacks Example-2 To use as a Mono IN/STEREO OUT effects Application ExampleExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixer Example-6 To produce original Remix Example-5 For one take live studio recordingExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instruments VM08 Initial State Useful information Normal Mix ModeCharacter display section Master fader display section Setting before switch off of power To return to the setting before switching off powerMute of the various input channel/master output To set to the present fader position Number is adjusted with the Data encoder Channel Parameter Edit ModeSetup method for PAN setting Setup method of the Effect Send level Setup method for EQ settingExample Character display section when LO is made to light Number is set with the Data encoder Example The character display section with light up A1 Setup method of the AUX Send levelExample Character section when E1 is lit Example The character display section with E1 is lit PRE/POST setup method for Effect SEND/AUX Send P. Fostex Advanced Signal Processing Technology Effect Edit Mode About the effect types Effect types preset for EFF When the EFF 2 key is pressed When the EFF 1 key is pressedSelecting the effect type Use the Data encoder to select the effect type To cancel muting Effect parameter settingsMuting an effect To mute the effect sound Effect parameter details Doubling effect parameters parameter type Doubling Delay pitch effect parameters parameter type Delay PitchChorus effect parameters parameter type Chorus Flanger effect parameters parameter type Flange Storing a scene memory Scene Memory ModeRecalling a scene memory Press the Scene Store key Fader adjust Level adjustPress the Level Adjust key Press the Fader Adjust key Clearing a scene memory Directly recalling a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 key Details of the setup menu Setup ModeMaking settings in setup mode Channel fader recall setting Display ChFdrRcl ? Fader Fix setting Display FaderFix ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ? Input 1 ~ SpecificationsInput 5/6 ~ 7/8 AUX Send 1/2 Declaration of EC Directive