Fostex VM08 Fader Fix setting Display FaderFix ?, Channel fader recall setting Display ChFdrRcl ?

Model VM08 Owner’s Manual

Fader Fix setting (Display: [FaderFix ?])

<Settings>

ON

OFF (default)

If this setting is turned on, the faders will no longer function in any mode.

This allows you to prevent the fader positions from being changed by accident or by vibra- tion.

Channel fader recall setting (Display: [ChFdrRcl ?])

<Settings> ON (default)

OFF

If this setting is turned off, only the input fader settings of each channel will be unaffected when you recall a scene.

In other words, the six input faders will main- tain the settings that they had immediately before the scene was recalled.

Regardless of this on/off setting, the input fad- ers will continue to function normally in all modes, as well as when you store a scene.

Master fader recall setting (Display: [MsFdrRcl ?])

<Settings> ON (default)

OFF

If this setting is turned off, the setting of the master fader will be unaffected when you re- call a scene. In other words, the master fader will maintain the setting that it had immedi- ately before the scene was recalled. This is convenient when you wish to set just the out- put level yourself, for example during a live performance.

Regardless of this on/off setting, the master fader will continue to function normally in all modes, as well as when you store a scene.

Foot Switch setting (Display: [Foot Sw ?])

Here you can specify the function of the foot switch.

	<Settings>
	-> SceneU/D (default)
	-> ST Mute
	-> EFF1 Mute
	-> EFF2 Mute
	-> E1&E2 Mute
	-> Delay Tap
SceneU/D:	Access the Scene Direct Recall
	function
	Pressing the foot switch once
	will enter Scene Direct Recall
	mode; subsequent presses of the
	foot switch will advance the
	scene number forward, and
	holding down the foot switch
	will return to the previous scene
	number.
	To exit Direct Recall mode, press
	the EXIT key.
ST Mute:	Switch muting on/off for the ST
	master signal
EFF1 Mute:	Switch muting on/off for EFF 1
EFF2 Mute:	Switch muting on/off for EFF 2

E1&E2 Mute: Switch muting on/off for EFF 1

	/ EFF 2.
Delay Tap:	When editing effect parameters,
	use the foot switch for tap in
	put of Delay Time or BPM.

Battery check (Display: [BattVolt ?])

This lets you check the voltage of the internal battery. After selecting this menu item, press the ENTER key. The voltage of the internal bat- tery will be displayed, allowing you to check it. When you have checked the voltage, press the EXIT key to exit Setup mode.

The life of the internal battery is approximately two years. When the battery runs down and the voltage decreases to a certain level, a warn- ing message of [Batt Empty] will appear in the display when the VM08 is powered-on. It is not possible for the user to replace the internal battery. Please contact a nearby Fostex office or service station. For details on the [Batt Empty] message, refer to page 6 "Before Op- eration."

28