Fostex VM08 owner manual Names and Functions

Model VM08 Owner’s Manual

Names and Functions

2 3 4 5 6 7

1

1

2

9V

AD-9B

ONLY

OUTRESET

DC IN S/P DIF FOOT SW AUX SEND

	7		5
8/7	8	6/5	6

				R	ST OUT	L		PHONES
4	TRIM	3		2			1	8
			TRIM		TRIM			TRIM
	-10 -50		-10 -50		-10	-50		-10 -50
		INPUT

		9
10	11	12	13
				14
28		EQ		15
27				16
				17
26				18
25				19
24
23
		22	21	20

1. AC adaptor connector

Connect the AC adaptor, included in the acces- sory kit, to a wall AC socket and plug the adaptor output cable to this jack (Be sure to use the adap- tor included in the VM08 package).

2. S/P DIF optical output connector

The same signal output from the ST OUT L/R jack is output here as digital audio signal in the S/P DIF format.

3. Foot switch connecting jack

A foot switch (Fostex Model 8051) is plugged in here. The foot switch function can be changed by the [SETUP mode] explained later. The initial set- ting recalls the scene memory. Refer to page 27 for details.

4. RESET switch

This switch resets the CPU inside VM08. Refer to page 6 for details.

5. AUX send jack

AUX SEND level signals, adjusted in the channel parameter edit mode, are output here. Refer to pages 8 and 17 for details.

6. STEREO OUT L, R jack

The mixed signal is output to the MTR, stereo moni- tor system or to other mixers. Output level is ad- justed by the MASTER fader.

7. Headphone jack

The monitoring headphone is connected here. Use the PHONES control to adjust the sound level.

4