PRE/POST setup method for Effect SEND/AUX Send | Fostex VM08

Model VM08 Owner’s Manual

PRE/POST setup method for EFFECT SEND/AUX SEND

In the procedure here, the effect send and AUX send signals are setup for PRE (pre-fader) or POST (post fader). In the initial state, EFFECT SEND 1, 2, AUX SEND 1, 2 are all setup for POST (post fader).

<Useful information!>

PRE (pre-fader) means that the signal is obtained before the INPUT fader and is not affected by the INPUT fader. POST (post fader) means that the signal is obtained following the INPUT fader and is affected by the INPUT fader. In other words, in the PRE setting, although the INPUT fader is at MIN, the EFFECT SEND or AUX SEND levels can be adjusted but in the POST setting, no signal can be sent if the INPUT fader is at MIN.

1.While pressing the EXIT, press the EFF/AUX key to light up [E1], [E2], [A1] or [A2] in the status display section.

The LCD will display the following:

Example: The character display section with [E1] is lit

[1-E1: Post] is displayed. Now, channel 1 EFFECT SEND 1 PRE/POST can be setup. This indicates that the present EFFECT SEND 1 PRE/POST is set at POST.

3.Adjust the number with the DATA encoder.

[Pre] or [Post] can be selected.

The graphic display will also change at the same time.

Changes to [Post] or [Pre].

If [Pre] is selected, the blinking 3 digits move upward.

Blinking	Lit

2.Press the desired CH ON/CH SEL key and select the channel you wish to adjust.

<Useful information!>

When channels 5/6 or 7/8 are selected, the two channels will be set at the same time. If MAS- TER is selected, all channels will be at the same time.

17

Image 17

Fostex VM08 PRE/POST setup method for Effect SEND/AUX Send, Example The character display section with E1 is lit

Contents

Model Safety Instructions Table of Contents Names and Functions Status indicator Contrast adjusting knobFader adjust key Level adjust key Internal battery for the memory back up Reset of VM08Remove the insulation paper Please remember this ST.OUT L, R jack Peripheral Equipment ConnectionInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacks AUX Send OUT 1/2 jack Input 5/6 7/8 and AUX Send 1/2 jacksInput 5/6, Input 7/8 jacks Example-2 To use as a Mono IN/STEREO OUT effects Application ExampleExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixer Example-6 To produce original Remix Example-5 For one take live studio recordingExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instruments VM08 Initial State Useful information Normal Mix ModeCharacter display section Master fader display section Setting before switch off of power To return to the setting before switching off powerMute of the various input channel/master output To set to the present fader position Number is adjusted with the Data encoder Channel Parameter Edit ModeSetup method for PAN setting Setup method of the Effect Send level Setup method for EQ settingExample Character display section when LO is made to light Number is set with the Data encoder Example The character display section with light up A1 Setup method of the AUX Send levelExample Character section when E1 is lit Example The character display section with E1 is lit PRE/POST setup method for Effect SEND/AUX Send P. Fostex Advanced Signal Processing Technology Effect Edit Mode About the effect types Effect types preset for EFF When the EFF 2 key is pressed When the EFF 1 key is pressedSelecting the effect type Use the Data encoder to select the effect type To cancel muting Effect parameter settingsMuting an effect To mute the effect sound Effect parameter details Doubling effect parameters parameter type Doubling Delay pitch effect parameters parameter type Delay PitchChorus effect parameters parameter type Chorus Flanger effect parameters parameter type Flange Storing a scene memory Scene Memory ModeRecalling a scene memory Press the Scene Store key Fader adjust Level adjustPress the Level Adjust key Press the Fader Adjust key Clearing a scene memory Directly recalling a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 key Details of the setup menu Setup ModeMaking settings in setup mode Channel fader recall setting Display ChFdrRcl ? Fader Fix setting Display FaderFix ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ? Input 1 ~ SpecificationsInput 5/6 ~ 7/8 AUX Send 1/2 Declaration of EC Directive