Garland SH/IN 5000, SH/WO/IN 3500 Electrical installation, Cooker can be damaged, Operating Test

Page 19

INSTALLATION continued

Electrical installation

CAUTION

If the voltage is wrong, the

cooker can be damaged.

 

The electrical installation must be done by approved installation contractors in accordance with specific national and local codes in conformity with all safety regulations. The warning signs and rating plates on the appliances must strictly be followed.

Check and ensure that the supply voltage and the line current matches the specifications given on the rating plate.

SPECIFICATIONS

Maximum Tolerance of Supply

+6/-10 %

 

 

Supply Frequency

50/60 Hz

 

 

1.Turn control knob to off position (“0”).

2.Connect operating unit to the generator.

3.Connect the unit to the power socket (The unit is delivered completely with mains cable and plug.)

When the installation is complete an operating test outlined in the below must be done.

Operating Test

Remove all objects from the glass ceramic zone, verify that this area is neither cracked nor broken. Do not continue the use when the glass ceramic cooking zone is cracked or broken, immediately switch it off and disconnect the cooker from the power outlet and contact a service representative.

The glass ceramic cooking zone is warmed up from the

CAUTION heat of the pan. To avoid injuries (burning) do not touch this area.

Use a pan suitable for induction cooking, having a bottom diameter of at least 4..72” (120mm) (only BH/IN and SH/IN)..

1Put some water in the pan and place it in the center of the heating area.

2.Turn the control knob to an ON position. The indicator will light up (green) and the water will be heated.

3.Take the pan away from the heating area, the indicator light will flash.

4.Place the pan back on the heating area, the indicator will light and the heating process will continue.

5.Turn the control knob in the OFF-position, the heating process will stop, indicator light turns off.

NOTE:   The shining operation indicator light means that energy is being transferred to the pan. If the operation indicator light remains off, check the following:

1.Is the cooker connected to the power outlet?

2.Is the control knob in ON position?

3.Did you use a suitable pan (bottom diameter at least 4.72” (120mm) (only BH/IN and SH/IN), pan made of suitable material)?

4.Is the pan placed in the center of the heating area?

To verify, if the pan is suitable, use a permanent magnet and find out if it sticks on the bottom of the pan. If not, your pan is not suitable for induction cooking. Choose a pan which is recommended for induction cooking. Choose pan material suitable for induction appliances.

If in spite of all positive controls and tests, the cooker doesn’t work, refer to the Fault Finding Section, or call a service representative.

Part # 4520898 (03/31/11)

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Installation 4520898 03/31/11 Health Information Important InformationFibers is known to the State California to cause cancer 4520898 03/31/11 Table of Contents Operating Conditions Dimensions and SpecificationsGeneral Information Ventilation InstallationRequirements For Installation Electrical SupplyCut Out For Model BH/IN InstallationCut Out for Models SH/IN 3500 And SH/IN 16.69 Cut Out For Models SH/WO/IN 3500, SH/WO/IN 5000Installation of Operating Unit Unit PlacementFigure # Fresh Air Intake InstallationCut Out Instructions For Assembly Induction Built-In Units4520898 03/31/11 Figure # Figure # Figure # Cooker can be damaged Electrical installationOperating Test Comfort Safety Information For Operator/Operating PersonnelOperation Cooking ProcessControl Of The Heating Area Unauthorized Reconstruction Use Of Spare PartsImproper Operating Methods Pan DetectionMaintenance Maintenance and CleaningTroubleshooting CleaningMalfunction With Error Code TroubleshootingMalfunction Without Error Code Troubleshooting 4520898 03/31/11 4520898 03/31/11

BH/IN 2500, SH/WO/IN 8000, SH/IN 3500, SH/WO/IN 5000, SH/IN 5000 specifications

The Garland BH/IN 2500, SH/WO/IN 5000, SH/IN 3500, SH/WO/IN 3500, and SH/IN 5000 are a series of robust and versatile equipment designed for diverse industrial applications. These models are engineered with cutting-edge technologies and cater to different operational needs, ensuring efficiency and effectiveness in their respective tasks.

The Garland BH/IN 2500 is known for its compact design and powerful performance. It features high durability material construction, ensuring it can withstand harsh working environments. The model is equipped with an advanced hydraulic system that enhances operational efficiency, allowing for precise movement and control. With a lifting capacity of up to 2500 kg, this equipment is ideal for medium-scale operations where space is a concern.

Moving on to the SH/WO/IN 5000, this model boasts an impressive 5000 kg lifting capacity, making it suitable for heavy-duty tasks. One of its standout features is its intelligent load-sensing technology, which optimizes the lifting process by automatically adjusting power based on the load weight. This not only improves efficiency but also extends the service life of the machine by minimizing wear and tear on components.

The SH/IN 3500 is another essential model in the lineup, designed with user-friendliness in mind. It incorporates an intuitive control system that simplifies operations, allowing even less experienced operators to handle it effectively. With safety features including automatic emergency brakes and overload protection, users can work with confidence.

Similar to the SH/IN 3500, the SH/WO/IN 3500 combines robust performance with adaptability. Its versatility allows it to handle both standard and specialized loads, making it a great option for businesses that encounter varying operational challenges. This model also emphasizes easy maintenance features, facilitating reduced downtime.

Finally, the SH/IN 5000 reinforces the series with its exceptional power and reliability. It includes advanced monitoring systems that provide real-time data on performance and diagnostics, enabling preventative maintenance and reduced operational reliability risks.

In conclusion, the Garland BH/IN and SH models offer a comprehensive range of features and technologies that cater to the needs of modern industries, ensuring that they remain essential tools for operations demanding efficiency, safety, and durability.
Top Page Image Contents