Garland SH/IN 5000, SH/WO/IN 3500, SH/WO/IN 5000, SH/IN 3500, SH/WO/IN 8000 Troubleshooting

Page 25

TROUBLESHOOTING continued

Fault

Possible Cause

Action To Take By Operator Or Operating

 

 

Personnel

 

 

 

After a long permanent

Coil overheated, cooking area too hot

Switch cooker off, remove pan and wait until

operating time, the

Empty pan

the cooking area has cooled off

heating switches off and

Pan with overheated oil

 

on within minutes

 

 

 

 

 

Small metallic objects

Pan detection circuit is defective

Ask your supplier for repair service

(e.g. spoon) are heated

 

 

up on the cooking area

 

 

1To verify, if the pan is suitable, use a permanent magnet and find out if it sticks on the bottom of the pan. If not, your pan is not suitable for induction cooking. Choose a pan which is recommended for induction cooking. Choose pan material suitable for induction appliances.

2The cooling-system (fan) starts to operate when the ambient temperature in the control area exceeds 131°F/55°C. At heat temperatures higher than 158°F /70°C the controller automatically reduces the power to keep the unit in normal operating conditions. The cooker runs in a non continuous mode. This mode can be heard.

Part # 4520898 (03/31/11)

Page 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Installation 4520898 03/31/11 Health Information Important InformationFibers is known to the State California to cause cancer 4520898 03/31/11 Table of Contents Operating Conditions Dimensions and SpecificationsGeneral Information Requirements For Installation InstallationElectrical Supply VentilationCut Out For Model BH/IN InstallationCut Out for Models SH/IN 3500 And SH/IN 16.69 Cut Out For Models SH/WO/IN 3500, SH/WO/IN 5000Installation of Operating Unit Unit PlacementFigure # Fresh Air Intake InstallationCut Out Instructions For Assembly Induction Built-In Units4520898 03/31/11 Figure # Figure # Figure # Cooker can be damaged Electrical installationOperating Test Operation Safety Information For Operator/Operating PersonnelCooking Process ComfortImproper Operating Methods Unauthorized Reconstruction Use Of Spare PartsPan Detection Control Of The Heating AreaTroubleshooting Maintenance and CleaningCleaning MaintenanceMalfunction With Error Code TroubleshootingMalfunction Without Error Code Troubleshooting 4520898 03/31/11 4520898 03/31/11

BH/IN 2500, SH/WO/IN 8000, SH/IN 3500, SH/WO/IN 5000, SH/IN 5000 specifications

The Garland BH/IN 2500, SH/WO/IN 5000, SH/IN 3500, SH/WO/IN 3500, and SH/IN 5000 are a series of robust and versatile equipment designed for diverse industrial applications. These models are engineered with cutting-edge technologies and cater to different operational needs, ensuring efficiency and effectiveness in their respective tasks.

The Garland BH/IN 2500 is known for its compact design and powerful performance. It features high durability material construction, ensuring it can withstand harsh working environments. The model is equipped with an advanced hydraulic system that enhances operational efficiency, allowing for precise movement and control. With a lifting capacity of up to 2500 kg, this equipment is ideal for medium-scale operations where space is a concern.

Moving on to the SH/WO/IN 5000, this model boasts an impressive 5000 kg lifting capacity, making it suitable for heavy-duty tasks. One of its standout features is its intelligent load-sensing technology, which optimizes the lifting process by automatically adjusting power based on the load weight. This not only improves efficiency but also extends the service life of the machine by minimizing wear and tear on components.

The SH/IN 3500 is another essential model in the lineup, designed with user-friendliness in mind. It incorporates an intuitive control system that simplifies operations, allowing even less experienced operators to handle it effectively. With safety features including automatic emergency brakes and overload protection, users can work with confidence.

Similar to the SH/IN 3500, the SH/WO/IN 3500 combines robust performance with adaptability. Its versatility allows it to handle both standard and specialized loads, making it a great option for businesses that encounter varying operational challenges. This model also emphasizes easy maintenance features, facilitating reduced downtime.

Finally, the SH/IN 5000 reinforces the series with its exceptional power and reliability. It includes advanced monitoring systems that provide real-time data on performance and diagnostics, enabling preventative maintenance and reduced operational reliability risks.

In conclusion, the Garland BH/IN and SH models offer a comprehensive range of features and technologies that cater to the needs of modern industries, ensuring that they remain essential tools for operations demanding efficiency, safety, and durability.
Top Page Image Contents