Garland BH/IN 2500, SH/WO/IN 3500, SH/IN 5000 Troubleshooting, Malfunction With Error Code

Page 23

TROUBLESHOOTING continued

Malfunction With Error Code

Number of Flashing

Possible Cause

Action To Take By Operator Or Operating

Signals (Code)

 

Personnel

E03

Overheated heat sink

Let unit cool down

- . . . - . . .

 

Check air filter and air flow

 

Air-cooling system obstructed

Verify that air inlet and air outlet are not

 

 

obstructed with objects

 

 

Clean air filter

 

 

 

E04

Overheated cooking zone

Let unit cool down

- . . . . - . . . .

 

Check air filter and air flow

E06

Overheated electronic

Let unit cool down

- . . . . . . -

 

Check air filter and air flow

 

Ambient temperature too high (the cooling

Verify that no hot air is sucked in by the fan.

 

system is not able to keep the cooker in normal

Reduce the ambient temperature. The air inlet

 

operating conditions 1)

temperature must be lower than 104°F/40°C

 

 

 

E07

Empty cooking sensing element activated

Reset empty cooking protection by switching

- . . . . . . . -

 

the unit off

E08

Ambient temperature beyond operating range

Make sure that the operating conditions

- . . . . . . . . -

 

(especially the ambient temperature) are kept

 

Error on sensing element

Contact service agent

 

 

 

Order of error message: The indicator lamp lights up for an interval of 0.6 sec. The number of the following short flashes has to be counted and informs about the kind of error corresponding to the above mentioned code system.

The code will repeat until the error is cancelled.

1The cooling-system (fan) starts to operate when the ambient temperature in the control area exceeds 131°F/55°C. At heat temperatures higher than 158°F /70°C the controller automatically reduces the power to keep the unit in normal operating conditions. The cooker runs in a non continuous mode. This mode can be heard.

Part # 4520898 (03/31/11)

Page 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Installation 4520898 03/31/11 Fibers is known to the State California to cause cancer Important InformationHealth Information 4520898 03/31/11 Table of Contents Operating Conditions Dimensions and SpecificationsGeneral Information Ventilation InstallationRequirements For Installation Electrical SupplyCut Out For Model BH/IN InstallationCut Out for Models SH/IN 3500 And SH/IN 16.69 Cut Out For Models SH/WO/IN 3500, SH/WO/IN 5000Installation of Operating Unit Unit PlacementFigure # Fresh Air Intake InstallationCut Out Instructions For Assembly Induction Built-In Units4520898 03/31/11 Figure # Figure # Figure # Operating Test Electrical installationCooker can be damaged Comfort Safety Information For Operator/Operating PersonnelOperation Cooking ProcessControl Of The Heating Area Unauthorized Reconstruction Use Of Spare PartsImproper Operating Methods Pan DetectionMaintenance Maintenance and CleaningTroubleshooting CleaningMalfunction With Error Code TroubleshootingMalfunction Without Error Code Troubleshooting 4520898 03/31/11 4520898 03/31/11

BH/IN 2500, SH/WO/IN 8000, SH/IN 3500, SH/WO/IN 5000, SH/IN 5000 specifications

The Garland BH/IN 2500, SH/WO/IN 5000, SH/IN 3500, SH/WO/IN 3500, and SH/IN 5000 are a series of robust and versatile equipment designed for diverse industrial applications. These models are engineered with cutting-edge technologies and cater to different operational needs, ensuring efficiency and effectiveness in their respective tasks.

The Garland BH/IN 2500 is known for its compact design and powerful performance. It features high durability material construction, ensuring it can withstand harsh working environments. The model is equipped with an advanced hydraulic system that enhances operational efficiency, allowing for precise movement and control. With a lifting capacity of up to 2500 kg, this equipment is ideal for medium-scale operations where space is a concern.

Moving on to the SH/WO/IN 5000, this model boasts an impressive 5000 kg lifting capacity, making it suitable for heavy-duty tasks. One of its standout features is its intelligent load-sensing technology, which optimizes the lifting process by automatically adjusting power based on the load weight. This not only improves efficiency but also extends the service life of the machine by minimizing wear and tear on components.

The SH/IN 3500 is another essential model in the lineup, designed with user-friendliness in mind. It incorporates an intuitive control system that simplifies operations, allowing even less experienced operators to handle it effectively. With safety features including automatic emergency brakes and overload protection, users can work with confidence.

Similar to the SH/IN 3500, the SH/WO/IN 3500 combines robust performance with adaptability. Its versatility allows it to handle both standard and specialized loads, making it a great option for businesses that encounter varying operational challenges. This model also emphasizes easy maintenance features, facilitating reduced downtime.

Finally, the SH/IN 5000 reinforces the series with its exceptional power and reliability. It includes advanced monitoring systems that provide real-time data on performance and diagnostics, enabling preventative maintenance and reduced operational reliability risks.

In conclusion, the Garland BH/IN and SH models offer a comprehensive range of features and technologies that cater to the needs of modern industries, ensuring that they remain essential tools for operations demanding efficiency, safety, and durability.
Top Page Image Contents