Harbor Freight Tools 93011 manual Never point the Hose 4 or any attachment at anyone

Page 5

4.Avoid unintentional starting. Make sure you are prepared to begin work before plugging in the Steamer.

5.Do not force the Steamer. This tool will do the work better and safer at the speed and capacity for which it was designed.

6.Never leave the Steamer unattended when it is plugged into an electrical outlet. Unplug it from its electrical outlet and allow it to cool before leaving.

7.Always unplug the Steamer from its electrical outlet and allow it to cool before performing inspection, maintenance, cleaning procedures, or changing accessories.

8.Do not allow water or steam to enter the plug or socket.

9.Wear heat resistant gloves. The water to make steam is heated to 212° Fahrenheit. Wear protective clothing and protect your hands.

10.Never remove the Filler Cap (5) or detach the Hose (4) while the appliance is operating or before it has cooled.

11.Do not pull on the Hose (4) or carry the unit by the Hose (4) or Power Cord (12).

12.Keep the work area clear of children, pets, and bystanders.

13.During operation, do not stand or step on the Boiler Unit (8) or Hose (4).

14.Never block the safety valve.

15.Only operate the unit when the Boiler Unit (8) is on a flat, level surface. Failure to do so will result in severe overheating, damaging the unit.

16.Never point the Hose (4) or any attachment at anyone.

17.Always keep all attachments away from the face and body. Beware of dripping hot water, and regularly empty collected condensation from the Steam Plate (6); especially prior to stripping ceilings and high areas.

18.After disconnecting power, wait at least two minutes before removing the Filler Cap (5) to refill the Boiler Unit (8).

19.Do not overfill the reservoir. Use only standard tap water. Never add detergents or chemicals.

20.Never use the Steamer when the Boiler Unit is in a suspended position. This will result in possible injury and damage to the unit.

21.Extreme care must be used when operating the Steamer in close proximity to standing water. Always be aware of the danger of electrocution from stored water in baths, sinks, etc.

22.Do not use the Steamer if the Power Cord (12) is damaged.

SKU 91098

PAGE 5

Image 5
Contents For technical questions, please call Wallpaper SteamerGeneral Safety Rules Product SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care Specific Safety RulesService Never point the Hose 4 or any attachment at anyone Do not use the Steamer if the Power Cord 12 is damagedSee Figure a GroundingGrounded Tools Tools with Three Prong Plugs Double Insulated Tools Tools with TWO Prong Plugs Extension CordsSee Figure C, next See Figure CExtension Cord Length SymbologyConnecting the Steam Hoses Assembly and Operating InstructionsUnpacking Filling The Boiler UnitWallpaper Stripping Operating InstructionsINSPECTION, MAINTENANCE, and Cleaning TroubleshootingBoiler Unit 8 fails to produce steam Boiler Unit 8 leaks steam from the pressure release valvePlease Read the Following Carefully Assembly Diagram Parts List