Hearth and Home Technologies GNBC33, GNBC30, GNBC36 manual Finishing, Appliance Preparation

Page 14

NOVUS B-VENT INSTALLATION INSTRUCTIONS

G.FINISHING

1.COMBUSTIBLE FINISHING MATERIAL

Material made of or surfaced with wood, compressed paper, plant fibers, plastics, or any material capable of igniting and burning, whether flame proofed or not, plastered or unplastered (this includes drywall).

2.NONCOMBUSTIBLE FINISHING MATERIAL

Material which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or combination thereof, or have a UL Fire rating of Zero (0).

3.HIGH TEMPERATURE SEALANT MATERIAL

Sealants that will withstand high temperatures: General Electric RTV103 (Black) or equivalent. Rutland, Inc. Appliance Mortar #63, or equivalent.

A high temperature sealant, 1/8” inch wide minimum, must be used to close off gaps between the appliance and facing to prevent cold air leaks. See Figure 17.

Note: If an optional fan or hand held remote control are to be used, wiring must be done prior to finishing to avoid reconstruction.

Figure 17 - Finishing Materials

WARNING!

Grilles on this appliance cannot, in any way, be cov- ered as it may create a fire hazard.

Note: The remote wall switch must be wired prior to applying the finishing material in order to avoid reconstruction.

H. APPLIANCE PREPARATION

1. ATTACHING THE HOOD

4. GLASS AND SCREEN REMOVAL

The hood is to be located above the glass panel. The hood must be attached or a fire hazard may result. Locate the four screws just inside the upper section of the appliance. Position the hood and slide into position. Tighten the four screws. See Figure 18.

2.UPPER GRILLE PANEL REMOVAL

Grasp the upper grille panel and remove the rubber pins holding the grille. See Figure 19.

3.CONTROL ACCESS PANEL REMOVAL

Release the spring pin on the right hand side of the control access panel. See Figure 20.

See page 21 of this manual.

Figure 19 - Upper Grille Panel Removal

 

 

 

 

 

 

 

 

 

 

 

Figure 18 - Hood Placement

 

Figure 20 - Control Access Panel Removal

 

 

 

 

 

 

 

 

 

 

34615 Rev G

14

12-02

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Novus Series Vent GAS Appliance Do not expose appliance to the elements such as rain, etcTable of Contents Design and Installation Considerations for B-VENTS Glass SPECIFICATIONS/CERTIFICATIONS Applicance SpecificationsTypical Vertical Installation S. and Canada CertificationLocation and Clearances Installation ComponentAppliance Dimensions Novus NomenclatureAppliance Locations and Space Requirements Wear gloves and safety glasses for protectionFraming ClearancesVent Height Setting the ApplianceVenting Attaching VentingInstalling the Firestop Spacer Firestop SPACER/VENT InstallationCHASE/TERMINATION Installation Check Venting System Installing AN Outside AIR KIT Strongly RecommendedTesting Ventilation Vent Height for Vertical Termination Roof Pitch Min. FtOutside Air Locations Utilities NovusWiring Wall SwitchJunction BOX Installation Instructions Intermittent Pilot IgnitionFinishing Appliance PreparationLog Set Determining the Ignition TypeAppliance Preparation Placing the Rock WoolTo Turn OFF the GAS to the Appliance Lighting InstructionsIntermittent Pilot Ignition Lighting Instructions Intermittent Pilot IgnitionTo Turn OFF the GAS to Appliance Standing Pilot IgnitionStanding Pilot Ignition Operation Seasonal ChecklistBefore Operating this Appliance have Qualified Technician Intermittent Pilot Ignition OperationSTART-UP Issues Outside AIR KIT OperationChecking Flame Patterns Maintenance InstructionsCleaning the Burner and Control Compartment Venting System Inspection Cleaning the GlassLOG REMOVAL/REPLACEMENT Optional Components Robertshaw Standing Pilot Conversion Kits Intermittent Pilot Conversion KitsQuick Tile Brass Surround Trim KitsBay Door Trim Kit Replacement Parts Item # Description QtyHomeowner’s Notes Index How to Obtain Service Limited Lifetime WarrantyYear Limited Warranty Conditions, Exclusions, & Limitations of Liability

GNBC33, GNBC36, GNBC30 specifications

Hearth and Home Technologies (HHT) has established itself as a leading manufacturer of innovative and efficient hearth products, and its GNBC series of gas fireplaces – specifically the GNBC30, GNBC33, and GNBC36 – exemplifies this commitment to quality and performance. Each model in this series is designed to combine elegance with cutting-edge technology, ensuring a warm and inviting atmosphere in any home.

One of the main features of the GNBC series is its versatile design. These models are built to be multi-sided, offering a view of the flames from various angles, making them ideal centerpieces for both modern and traditional home interiors. The GNBC30, GNBC33, and GNBC36 showcase a minimalist aesthetic, available in multiple finishes and configurations, allowing homeowners to customize their spaces to reflect their personal style and preferences.

Efficiency is a crucial aspect of these gas fireplaces. The GNBC series utilizes advanced gas technology to provide clean and efficient heating, with a focus on maximizing warmth while minimizing energy consumption. These fireplaces are also equipped with smart electronic ignition systems, which enhance convenience and promote energy efficiency. By utilizing a thermostat, users can maintain their desired temperature effortlessly.

Safety is a top priority for HHT, and the GNBC series incorporates numerous safety features. The models come standard with a glass front and built-in safety screens, significantly reducing the risk of burns and accidents. Additionally, they feature a durable construction designed to last, ensuring that these fireplaces remain a safe and effective source of heat for years to come.

Another notable characteristic of the GNBC series is the ease of installation. Designed with the homeowner in mind, these fireplaces are relatively simple to integrate into a variety of architectural settings. The GNBC models can be vented through either natural ventilation or direct vent systems, allowing for greater flexibility based on the specific needs of the home.

In summary, Hearth and Home Technologies' GNBC30, GNBC33, and GNBC36 gas fireplaces offer a unique blend of style, technology, and safety. With their modern aesthetics, excellent efficiency ratings, and exceptional safety features, these fireplaces are an excellent choice for those seeking to enhance their living spaces while enjoying the benefits of a reliable heating source. Whether for new construction or renovation projects, the GNBC series stands out as a premier option for homeowners looking to elevate their hearth experience.
Top Page Image Contents