Loading your Machine
Before placing dishes in the machine, remove any scraps of food from the plates (small bones, toothpicks, fish bones, scraps of meat and vegetables, fruit skins etc.) to avoid clogging the filters and consequently reducing performance.
Open the door and slide out the baskets to load the dishes.
UI07 |
The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them hori- zontally in opposite directions and pull them apart. To re- assemble, reverse the proce- dure.
Use of the Lower Basket
The lower basket is designed to take saucepans, lids, plates (up to 27 cm in diameter), salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the up- per spray arm can turn freely.
UI22 | IEC 436 / DIN 44990 |
|
UI21 |
Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upward.
Mix spoons with the other cutlery to prevent them sticking together.
Teaspoons may be loaded into the special slots provided in the cutlery basket handle.
The two rear rows of prongs on the lower basket can be easily lowered to al- low you to load pots, pans and bowls.
To lower the prongs: slightly pull them upward and let them drop down
UI18
(see picture); to bring them back to the standing position, just pull them up again.
Use of the Upper Basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates up to 24 cm in diame- ter), salad bowls, cups and glasses; these should be arranged as shown in the pictures. Glasses with long stems can be placed
US22 | IEC 436 / DIN 44990 |
PCE05GB
10