The cutlery basket
Long bladed knives stored in an upright position are a potential hazard.
Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as knives.
Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards.
If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it).
UI76
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.
| Maximum height of the dishes in | |
| upper basket | lower basket |
|
|
|
|
|
|
With upper basket raised | 20 cm | 31 cm |
|
|
|
With upper basket lowered | 24 cm | 27 cm |
|
|
|
To move to the higher position proceed as follows:
1.Pull out the basket until it stops.
2.Carefully lift both sides upwards until the mechanism is engaged and the basket is stable.
Attention!
Never lift or lower the basket on one side only
When the basket is in the higher position you will not be able to use the cup rack(s).
RC09
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses.
To lower the basket to the original position proceed as follows:
1. Pull out the basket until it stops. |
Arrange items on and underneath the cup racks so that water can reach all surfaces.
Glasses with long stems can be placed upside down in the cup racks.
For taller items, the cup racks can be folded upwards. Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move.
US75 |
US74 |
2. Carefully lift both sides upwards and then allow the |
mechanism to drop back down slowly, keeping hold of it. |
After loading your machine always close the door, as an open door can be a hazard.
Before closing the door, ensure that the spray arms can rotate freely.
9