Zanussi ZSF 4123 S manual Description of the appliance

Page 4

Description of the appliance

1.Upper basket stop

2.Water hardness dial

3.Salt container

4.Detergent dispenser

5.Control panel

6.Rating plate

7.Rinse aid dispenser

8. Filters

9.Lower spray arm

10. Upper spray arm

11.Upper basket

12.Worktop

IN154

Description of the appliance

Function buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of these buttons:

-the setting of the water softener,

-deactivation/activation of the rinse aid dispenser,

-the cancelling of a programme in progress.

Programme selection buttons: the selection of a washing programme occurs by pressing one of these buttons (see "Washing programmes" chart).

Option button "Care Plus": this appliance is equipped with a special additional function, which makes it possible to thoroughly disinfect dishes and glasses, such as jam jars.

This function can be selected as an extra to all washing programmes (except for the Rinse and Hold programme).

In the last rinse phase the temperature will be held at over 65°C for at least 10 minutes.

The consumption values of time and energy given in the "Washing programmes" chart will change if the "Care Plus" option is used.

To set a washing programme with this option follow the instructions in "Starting a washing programme".

4

Image 4
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Prior to using for the first time Water softenerTo fill Filling with dishwasher saltExamples Adjusting the dose Rinse aidFilling with rinse aid Deactivation/activation of the rinse aid dispenserDaily use Loading cutlery and dishesLower basket Are of limited suitabilityAdjusting the height of the upper basket Cutlery basketUpper basket To move to the higher position proceed as followsUse of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Automatic washing programmeSetting and starting the programme To interrupt or cancel a washing programme in progressStarting a washing programme End of the washing programmeMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Fitting under a counterLevelling Water supply connectionsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Hints for test centres Cup racks position aPage Page From the Electrolux Group. The World’s No.1 choice