Zanussi ZSF 6128 manual Starting a washing programme, End of the washing programme

Page 13

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Close the dishwasher door

4.Setting and starting the programme

Turn the programme selector dial until the marker on the dial corresponds with the desired programme (see "Washing programmes" chart).

The On/Off indicator light illuminates.

The indicator lights of the phases foreseen for the programme start flashing.

Press the Start/Cancel button, the programme starts automatically and the Start/Cancel indicator light illuminates.

The indicator light of the phase in progress is illuminated.

NOTE: during the running of the programme, it is not possible to change the selection made by positioning the programme selector dial in correspondence of another programme. If you want to change the running washing programme you must cancel the selection made (see "To cancel a washing programme in progress").

Set the "Delay Start" of a programme:

Once the washing programme has been set, press the "Delay Start" button.

The corresponding indicator light illuminates.

Press the Start/Cancel button, the countdown of the delay start begins automatically.

The indicator lights of the phases turn off.

The opening of the door will not modify or interrupt the countdown.

Once the delay start has elapsed the washing programme will start automatically, the delay start indicator light turns off and the indicator light of the phase in progress illuminates.

To cancel a delay start in progress

Press the Start/Cancel button for about 5 seconds, the indicator lights of Start/Cancel and Delay Start buttons turn off while the indicator lights of the phases start flashing.

To start the selected washing programme press the Start/Cancel button.

NOTE: the washing programme or the countdown of the delay start will begin only after having pressed the Start/Cancel button. Until that moment it is possible to modify the selection made.

5. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

To interrupt a washing programme in progress

Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

To cancel a washing programme in progress

Press the Start/Cancel button for about 5 seconds. The Start/Cancel indicator light turns off and the phase indicator lights are flashing.

The running programme has been cancelled and it is now possible to set a new washing programme.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

6. End of the washing programme

The dishwasher will stop automatically.

The illumination of the End indicator light indicates that the programme has ended.

Switch off the dishwasher by returning the programme selector dial to the Off position.

The On/Off indicator light turns off.

Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

7. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Wash Start/Cancel buttonDry EndSetting manually Prior to using for the first timeWater softener ExamplesFilling with dishwasher salt Adjusting the doseRinse aid Filling with rinse aidLoading cutlery and dishes Daily useLower basket Are of limited suitabilityUpper basket Cutlery basketUse of detergent Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsWashing programmes Starting a washing programme To interrupt or cancel a washing programme in progressEnd of the washing programme Unloading the dishwasherCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Cup racks position a Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice

ZSF 6128 specifications

The Zanussi ZSF 6128 is a versatile and efficient dishwasher designed to cater to the needs of modern households. Known for its user-friendly features and energy efficiency, this model not only helps in tackling dirty dishes but also does so while being environmentally conscious.

One of the standout features of the Zanussi ZSF 6128 is its compact size, making it ideal for smaller kitchens or apartments. Despite its size, it offers a generous capacity, capable of accommodating up to 9 place settings. This means that users can wash a significant amount of dishes in one go, saving both time and water.

The dishwasher incorporates several wash programs to suit different cleaning needs. These programs include intensive, normal, eco, and quick wash options, allowing users to choose the most appropriate cycle based on how dirty the dishes are. The eco mode is especially noteworthy, as it optimizes water and energy consumption without compromising on cleaning performance.

Another significant characteristic of the Zanussi ZSF 6128 is its highly efficient drying system. The AirDry technology employed in this dishwasher ensures that dishes are not only washed properly but also dried effectively. By automatically opening the door at the end of the cycle, it allows fresh air to circulate, which helps in drying dishes naturally, minimizing the need for additional energy usage.

User convenience is at the forefront of the design of the ZSF 6128. It features easy-to-use controls and a clear LED display that provides essential information, such as the time remaining in the wash cycle. Additionally, the model includes adjustable racks, which allow users to customize the interior space to accommodate larger items like pots and pans.

Noise levels are also a crucial factor in any household appliance, and the Zanussi ZSF 6128 operates quietly, making it suitable for open-plan living spaces or homes where noise might be a concern. This model operates at around 49 decibels, ensuring that it won’t disrupt daily activities.

In terms of energy efficiency, this dishwasher is rated highly, contributing to lower energy bills and a reduced environmental footprint. Its combination of effective cleaning performance and energy-saving technologies makes it a smart choice for eco-conscious consumers.

Overall, the Zanussi ZSF 6128 is an excellent option for those seeking a reliable and efficient dishwasher that combines modern features, user-friendly operation, and a commitment to sustainability. Whether for small households or anyone in need of a practical washing solution, this dishwasher stands out in its class.
Top Page Image Contents