Zanussi ZSF 6128 manual Start/Cancel button, Wash, Dry, End, Salt, Rinse-Aid

Page 5

The control panel

Start/Cancel indicator light

On/Off indicator light

Programme selection marker

Indicator lights

 

 

Programme guide

Door handle

Programme selector dial Delay Start button

Start/Cancel button

Programme selector dial and On/Off indicator light: the selection of a washing programme occurs by turning the programme selector dial clockwise or anticlockwise, until the desired washing programme (see "Washing programmes" chart) corresponds with the programme selection marker placed on the dial (position On). The On/Off indicator light illuminates.

The indicator lights of the phases foreseen for the selected programme start flashing.

To switch off the machine turn the programme selector dial until the marker on the dial corresponds with the On/Off indicator light (position Off). The On/Off indicator light turns off.

With the programme selector dial it is also possible to set the level of the water softener (see specific paragraph).

"Delay Start" button: this option allows the start of the programme to be delayed by 3 hours; the corresponding indicator light illuminates.

"Start/Cancel" button: once a washing programme has been set, press this button to start the programme.

The Start/Cancel indicator light (placed above the button) illuminates.

With this button it is possible to cancel a washing programme in progress.

Indicator lights: have the following meanings:

Wash

illuminates when the washing and rinsing

 

phases are running.

 

 

Dry

illuminates when the drying phase is

 

running.

 

 

End

illuminates when the washing programme

 

has ended.

 

It also has added functions of visual

 

signalling as:

 

-

the setting of the water softener,

 

-

intervention of an alarm due to the

 

 

malfunction of the machine.

 

 

 

As soon as you select a washing programme, the phase indicator lights for that programme will start flashing.

As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in progress which will remain lit with a static light.

Salt

refilling indicator light: illuminates when the

 

salt has run out.

 

 

Rinse-Aid

refilling indicator light: illuminates when the

 

rinse aid has run out.

 

 

The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary.

5

Image 5 Contents
Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Wash Start/Cancel buttonDry EndSetting manually Prior to using for the first timeWater softener ExamplesFilling with dishwasher salt Adjusting the doseRinse aid Filling with rinse aidLoading cutlery and dishes Daily useLower basket Are of limited suitabilityUpper basket Cutlery basketUse of detergent Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsWashing programmes Starting a washing programme To interrupt or cancel a washing programme in progressEnd of the washing programme Unloading the dishwasherCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Cup racks position a Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice