Zanussi ZSF 6128 manual Installation instructions, Fitting under a counter, Levelling

Page 19

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570

-

 

600

820

 

600

 

IN05

 

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used with another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance End Start/Cancel buttonWash DryExamples Prior to using for the first timeSetting manually Water softenerFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketUpper basket Cutlery basketFill with detergent Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Unloading the dishwasher To interrupt or cancel a washing programme in progressStarting a washing programme End of the washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsMalfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeWater supply connections Installation instructionsFitting under a counter LevellingElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Cup racks position a Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice

ZSF 6128 specifications

The Zanussi ZSF 6128 is a versatile and efficient dishwasher designed to cater to the needs of modern households. Known for its user-friendly features and energy efficiency, this model not only helps in tackling dirty dishes but also does so while being environmentally conscious.

One of the standout features of the Zanussi ZSF 6128 is its compact size, making it ideal for smaller kitchens or apartments. Despite its size, it offers a generous capacity, capable of accommodating up to 9 place settings. This means that users can wash a significant amount of dishes in one go, saving both time and water.

The dishwasher incorporates several wash programs to suit different cleaning needs. These programs include intensive, normal, eco, and quick wash options, allowing users to choose the most appropriate cycle based on how dirty the dishes are. The eco mode is especially noteworthy, as it optimizes water and energy consumption without compromising on cleaning performance.

Another significant characteristic of the Zanussi ZSF 6128 is its highly efficient drying system. The AirDry technology employed in this dishwasher ensures that dishes are not only washed properly but also dried effectively. By automatically opening the door at the end of the cycle, it allows fresh air to circulate, which helps in drying dishes naturally, minimizing the need for additional energy usage.

User convenience is at the forefront of the design of the ZSF 6128. It features easy-to-use controls and a clear LED display that provides essential information, such as the time remaining in the wash cycle. Additionally, the model includes adjustable racks, which allow users to customize the interior space to accommodate larger items like pots and pans.

Noise levels are also a crucial factor in any household appliance, and the Zanussi ZSF 6128 operates quietly, making it suitable for open-plan living spaces or homes where noise might be a concern. This model operates at around 49 decibels, ensuring that it won’t disrupt daily activities.

In terms of energy efficiency, this dishwasher is rated highly, contributing to lower energy bills and a reduced environmental footprint. Its combination of effective cleaning performance and energy-saving technologies makes it a smart choice for eco-conscious consumers.

Overall, the Zanussi ZSF 6128 is an excellent option for those seeking a reliable and efficient dishwasher that combines modern features, user-friendly operation, and a commitment to sustainability. Whether for small households or anyone in need of a practical washing solution, this dishwasher stands out in its class.
Top Page Image Contents