Zanussi ZSF 6128 manual Water outlet hose connection, Electrical connection

Page 20

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

Warning!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

20

Image 20
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Start/Cancel button WashDry EndPrior to using for the first time Setting manuallyWater softener ExamplesAdjusting the dose Filling with dishwasher saltRinse aid Filling with rinse aidDaily use Loading cutlery and dishesLower basket Are of limited suitabilityCutlery basket Upper basketAdjusting the height of the upper basket Use of detergentTo move to the higher position proceed as follows Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes To interrupt or cancel a washing programme in progress Starting a washing programmeEnd of the washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Fitting under a counterLevelling Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Hints for test centres Cup racks position aPage Page From the Electrolux Group. The World’s No.1 choice

ZSF 6128 specifications

The Zanussi ZSF 6128 is a versatile and efficient dishwasher designed to cater to the needs of modern households. Known for its user-friendly features and energy efficiency, this model not only helps in tackling dirty dishes but also does so while being environmentally conscious.

One of the standout features of the Zanussi ZSF 6128 is its compact size, making it ideal for smaller kitchens or apartments. Despite its size, it offers a generous capacity, capable of accommodating up to 9 place settings. This means that users can wash a significant amount of dishes in one go, saving both time and water.

The dishwasher incorporates several wash programs to suit different cleaning needs. These programs include intensive, normal, eco, and quick wash options, allowing users to choose the most appropriate cycle based on how dirty the dishes are. The eco mode is especially noteworthy, as it optimizes water and energy consumption without compromising on cleaning performance.

Another significant characteristic of the Zanussi ZSF 6128 is its highly efficient drying system. The AirDry technology employed in this dishwasher ensures that dishes are not only washed properly but also dried effectively. By automatically opening the door at the end of the cycle, it allows fresh air to circulate, which helps in drying dishes naturally, minimizing the need for additional energy usage.

User convenience is at the forefront of the design of the ZSF 6128. It features easy-to-use controls and a clear LED display that provides essential information, such as the time remaining in the wash cycle. Additionally, the model includes adjustable racks, which allow users to customize the interior space to accommodate larger items like pots and pans.

Noise levels are also a crucial factor in any household appliance, and the Zanussi ZSF 6128 operates quietly, making it suitable for open-plan living spaces or homes where noise might be a concern. This model operates at around 49 decibels, ensuring that it won’t disrupt daily activities.

In terms of energy efficiency, this dishwasher is rated highly, contributing to lower energy bills and a reduced environmental footprint. Its combination of effective cleaning performance and energy-saving technologies makes it a smart choice for eco-conscious consumers.

Overall, the Zanussi ZSF 6128 is an excellent option for those seeking a reliable and efficient dishwasher that combines modern features, user-friendly operation, and a commitment to sustainability. Whether for small households or anyone in need of a practical washing solution, this dishwasher stands out in its class.