Zanussi ZDT 6053 Installation instructions, Building-in, Levelling, Fixing to the adjacent units

Page 19

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Building-in

This dishwasher is designed to be fitted under a kitchen counter or worksurface.

Attention!

Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

When inserting the machine, ensure that the water inlet hose, the drain hose and the supply cable are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Fixing to the adjacent units

The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Programme indicator lights Audible signalsDeactivation/activation of the audible signals Setting manually Prior to using for the first timeWater softener Filling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketUpper basket Cutlery basketFill with detergent Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Unloading the dishwasher To interrupt or cancel a washing programme in progressTo cancel a washing programme in progress Starting a washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsMalfunction Possible cause Solutions Fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard guarantee conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice

ZDT 6053 specifications

The Zanussi ZDT 6053 is an impressive built-in dishwasher that combines efficiency, convenience, and performance to meet the demands of busy households. Known for its sleek design and practicality, this model stands out in the crowded dishwasher market.

One of the primary features of the Zanussi ZDT 6053 is its spacious interior, accommodating up to 13 place settings. This makes it ideal for families or those who frequently entertain guests. The adjustable upper basket allows for flexible loading options, providing ample space for larger pots and dishes, while the cutlery tray ensures organized and efficient cleaning of utensils.

Efficiency is a hallmark of the Zanussi ZDT 6053, with an energy rating of A++. This means it operates with lower energy consumption while still delivering excellent cleaning results. Additionally, it boasts a range of wash programs, including Eco, Intensive, and Quick options, which cater to various cleaning needs. The Quick Wash program, in particular, is a time-saver, offering clean dishes in as little as 30 minutes, perfect for those in a hurry.

The appliance is equipped with innovative technologies designed to enhance performance. The Auto Open Door feature, for instance, helps with drying efficiency by allowing steam to escape at the end of the cycle, ensuring that dishes are dried effectively without the need for additional energy. Meanwhile, the Soft Touch controls provide an intuitive user experience, simplifying the selection of wash programs.

Noise levels are another significant consideration in modern dishwashers, and the Zanussi ZDT 6053 does not disappoint, operating at a quiet 47 dB. This low noise level makes it suitable for open-plan living spaces, ensuring that conversations are not interrupted during operation.

Safety features are also integral to this model. The Zanussi ZDT 6053 includes a child lock mechanism that prevents accidental operation, making it a safe choice for families with young children.

In conclusion, the Zanussi ZDT 6053 is a versatile and reliable built-in dishwasher that combines spacious design, efficiency, and advanced technologies. Whether you are cleaning everyday dishes or hosting larger gatherings, this model offers customizable options to suit your needs while maintaining an eco-friendly profile. With its user-friendly features and excellent performance, the Zanussi ZDT 6053 is a worthy addition to any modern kitchen.
Top Page Image Contents