Zanussi ZDT 6053 manual Filling with dishwasher salt, Rinse aid, Filling with rinse aid, To fill

Page 7

Filling with dishwasher salt

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing programmes.

This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.

2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1.Open the container by pressing the release button (A).

2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".

3.Using the funnel provided, pour in the salt until the container is full.

4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5.Replace on the cap tightly turning it clockwise until it stops with a click.

SALE

ZOUTT

SAL

SALZ

SEL

SR14

Ensure that the lid is closed after every refill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position

6 maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky

 

whitish streaks on the dishes

 

or a bluish film on glassware

 

or knife blades.

BR12

 

Top up the rinse aid when the

 

indicator (B) becomes clear.

 

 

BR11

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Programme indicator lights Audible signalsDeactivation/activation of the audible signals Setting manually Prior to using for the first timeWater softener Filling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketUpper basket Cutlery basketFill with detergent Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Unloading the dishwasher To interrupt or cancel a washing programme in progressTo cancel a washing programme in progress Starting a washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsMalfunction Possible cause Solutions Fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard guarantee conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice

ZDT 6053 specifications

The Zanussi ZDT 6053 is an impressive built-in dishwasher that combines efficiency, convenience, and performance to meet the demands of busy households. Known for its sleek design and practicality, this model stands out in the crowded dishwasher market.

One of the primary features of the Zanussi ZDT 6053 is its spacious interior, accommodating up to 13 place settings. This makes it ideal for families or those who frequently entertain guests. The adjustable upper basket allows for flexible loading options, providing ample space for larger pots and dishes, while the cutlery tray ensures organized and efficient cleaning of utensils.

Efficiency is a hallmark of the Zanussi ZDT 6053, with an energy rating of A++. This means it operates with lower energy consumption while still delivering excellent cleaning results. Additionally, it boasts a range of wash programs, including Eco, Intensive, and Quick options, which cater to various cleaning needs. The Quick Wash program, in particular, is a time-saver, offering clean dishes in as little as 30 minutes, perfect for those in a hurry.

The appliance is equipped with innovative technologies designed to enhance performance. The Auto Open Door feature, for instance, helps with drying efficiency by allowing steam to escape at the end of the cycle, ensuring that dishes are dried effectively without the need for additional energy. Meanwhile, the Soft Touch controls provide an intuitive user experience, simplifying the selection of wash programs.

Noise levels are another significant consideration in modern dishwashers, and the Zanussi ZDT 6053 does not disappoint, operating at a quiet 47 dB. This low noise level makes it suitable for open-plan living spaces, ensuring that conversations are not interrupted during operation.

Safety features are also integral to this model. The Zanussi ZDT 6053 includes a child lock mechanism that prevents accidental operation, making it a safe choice for families with young children.

In conclusion, the Zanussi ZDT 6053 is a versatile and reliable built-in dishwasher that combines spacious design, efficiency, and advanced technologies. Whether you are cleaning everyday dishes or hosting larger gatherings, this model offers customizable options to suit your needs while maintaining an eco-friendly profile. With its user-friendly features and excellent performance, the Zanussi ZDT 6053 is a worthy addition to any modern kitchen.
Top Page Image Contents