Zanussi ZDT 6053 manual Water outlet hose connection, Electrical connection, Proceed as follows

Page 20

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Deactivation/activation of the audible signals Audible signalsProgramme indicator lights Water softener Prior to using for the first timeSetting manually Adjusting the dose Filling with dishwasher saltRinse aid Filling with rinse aidDaily use Loading cutlery and dishesLower basket Are of limited suitabilityCutlery basket Upper basketAdjusting the height of the upper basket Use of detergentTo move to the higher position proceed as follows Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes To interrupt or cancel a washing programme in progress To cancel a washing programme in progressStarting a washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard guarantee conditionsEuropean Guarantee ExclusionsInstallation instructions Building-inLevelling Fixing to the adjacent unitsWater outlet hose connection Electrical connectionGreen and Yellow Earth Blue- Neutral Brown- Live Proceed as followsHints for test centres Cup racks position aPage Page From the Electrolux Group. The World’s No.1 choice

ZDT 6053 specifications

The Zanussi ZDT 6053 is an impressive built-in dishwasher that combines efficiency, convenience, and performance to meet the demands of busy households. Known for its sleek design and practicality, this model stands out in the crowded dishwasher market.

One of the primary features of the Zanussi ZDT 6053 is its spacious interior, accommodating up to 13 place settings. This makes it ideal for families or those who frequently entertain guests. The adjustable upper basket allows for flexible loading options, providing ample space for larger pots and dishes, while the cutlery tray ensures organized and efficient cleaning of utensils.

Efficiency is a hallmark of the Zanussi ZDT 6053, with an energy rating of A++. This means it operates with lower energy consumption while still delivering excellent cleaning results. Additionally, it boasts a range of wash programs, including Eco, Intensive, and Quick options, which cater to various cleaning needs. The Quick Wash program, in particular, is a time-saver, offering clean dishes in as little as 30 minutes, perfect for those in a hurry.

The appliance is equipped with innovative technologies designed to enhance performance. The Auto Open Door feature, for instance, helps with drying efficiency by allowing steam to escape at the end of the cycle, ensuring that dishes are dried effectively without the need for additional energy. Meanwhile, the Soft Touch controls provide an intuitive user experience, simplifying the selection of wash programs.

Noise levels are another significant consideration in modern dishwashers, and the Zanussi ZDT 6053 does not disappoint, operating at a quiet 47 dB. This low noise level makes it suitable for open-plan living spaces, ensuring that conversations are not interrupted during operation.

Safety features are also integral to this model. The Zanussi ZDT 6053 includes a child lock mechanism that prevents accidental operation, making it a safe choice for families with young children.

In conclusion, the Zanussi ZDT 6053 is a versatile and reliable built-in dishwasher that combines spacious design, efficiency, and advanced technologies. Whether you are cleaning everyday dishes or hosting larger gatherings, this model offers customizable options to suit your needs while maintaining an eco-friendly profile. With its user-friendly features and excellent performance, the Zanussi ZDT 6053 is a worthy addition to any modern kitchen.
Top Page Image Contents