Indicator lights
The indicator light comes on when the washing pro- gramme is completed. Auxiliary functions:
• Level of the water softener.
• Activation/deactivation of the audible signals.
• Activation/deactivation of the rinse aid dispenser.
• An alarm if the appliance has a malfunction.
1) The indicator light is off while a washing programme operates.
Function buttons
Use the function buttons for these operations:
•To set the water softener. Refer to the chapter 'Setting the water softener'.
•To deactivate/activate the audible signals. Refer to the section 'Audible signals'.
•To activate/deactivate the multitab function. Refer to the chapter 'Multitab function'.
•To deactivate/activate the rinse aid dispenser when multitab function is active. Refer to the chapter 'Mul- titab function'.
•To cancel the washing programme in progress or a delay start in progress. Refer to the chapter 'Setting and starting a washing programme'.
Delay start button
Use the delay start button to delay the start of the washing programme with an interval of 3, 6 or 9 hours. Refer to the chapter 'Setting and starting a washing programme'.
Setting mode
The appliance is in setting mode when all the programme indicator lights are on.
The appliance must be in setting mode for these opera- tions:
–To set a washing programme.
–To set the water softener level.
–To deactivate/activate the audible signals.
–To deactivate/activate the rinse aid dispenser.
If a programme indicator light is on, cancel the pro- gramme to go back to the setting mode. Refer to the chapter "Setting and starting a washing programme".
Audible signals
You can hear an audible signal:
•At the end of the washing programme.
•During the setting of the level of the water softener.
•When the appliance has a malfunction.
The activation of the audible signals is set at the factory. Do these steps to deactivate the audible signals:
1.Switch on the appliance.
2.Make sure that the appliance is in setting mode.
3.Press and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash.
4.Press the function button C.
–Indicator lights for function buttons A and B go off.
–Indicator light for function button C starts to flash.
–The end indicator light comes on.
The audible signals are activated.
5.Press the function button C again.
–The end indicator light goes off. The audible signals are deactivated.
6.Switch off the appliance to save the operation. Do these steps to activate the audible signals:
1.Do the above procedure until the end indicator light comes on.
4