•Do not put the water inlet hose or the safety valve in water.
•If the water inlet hose or the safety valve is damaged, immediately disconnect the mains plug from the mains socket.
•Only let the Service Force Centre replace the water inlet hose with safety valve.
Drain hose
max 85 cm
cm | min 40 cm | |
max 400 | ||
|
12
Connect the water drain hose to the sink spigot.
34
The internal diameter must not be smaller than the diam- eter of the hose.
If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a block- age in the drain hose spigot.
Caution! Make sure that the water couplings are tight to prevent water leakage.
Electrical connection
Warning! The manufacturer is not responsible if you do not follow these safety precautions.
Ground the appliance according to safety precautions. Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.
Always use a correctly installed shockproof socket. Do not use
Do not replace the mains cable yourself. Contact the Service Force Centre.
Make sure that the mains plug is accessible after installation.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
17