Zanussi ZDT311 Use of rinse aid, Loading cutlery and dishes, Adjusting the dosage of rinse aid

Page 8
Use of rinse aid

Use of rinse aid

Caution! Only use branded rinse aid for dishwashers.

Do these steps to fill the rinse aid dispenser:

12

34

Fill when the rinse aid in- dicator (B) becomes clear.

5

Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent,

liquid detergent). There is a risk of damage to the appliance.

Adjusting the dosage of rinse aid

The rinse aid dial is set at the factory at position 4. To increase or decrease the dosage refer to 'What to do if...'

Loading cutlery and dishes

Helpful hints and tips

Caution! Only use the appliance for household utensils that are applicable for dishwashers.

Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.).

Before you load cutlery and dishes, do these steps:

Remove all food remainings and debris.

Make burnt, remaining food in pans soft.

While you load cutlery and dishes, do these steps:

Load hollow items (e.g. cups, glasses and pans) with the opening down.

Make sure that water does not collect in the con- tainer or in a deep base.

Make sure that cutlery and dishes do not lie inside one another.

8

Make sure that cutlery and dishes do not cover other cutlery and dishes.

Make sure that glasses do not touch other glasses.

Put small objects in the cutlery basket.

Plastic items and pans with non-stick coatings can keep water droplets. Plastic items do not dry as well as porcelain and steel items.

Put light items in the upper basket. Make sure that the items do not move.

Caution! Make sure that the spray arms can move freely before you start a washing programme.

Warning! Always close the door after you load or unload the appliance. An open door can be

dangerous.

Image 8
Contents Dishwasher ZDT311Contents Safety informationGeneral safety Child safetyIndicator lights Control panelSetting mode Audible signalsFunction buttons Delay start buttonWashing programmes Consumption valuesWashing programmes ProgrammeSetting the water softener Manual adjustmentWater hardness setting Use of the applianceElectronic adjustment Use of dishwasher saltAdjusting the dosage of rinse aid Use of rinse aidLoading cutlery and dishes Helpful hints and tipsAdjustment of the height of the upper basket Maximum height of the dishes inUpper position Lower positionUse of detergent Setting and starting a washing programme Cancelling a washing programmeMultitab function Do these steps if the drying results are not satis- factoryCare and cleaning Setting and starting a washing programme with delay startCleaning the filters Cancelling a delay startWhat to do if… External cleaningFrost precautions Possible cause and solution Fault code and malfunctionEnvironment concerns Technical dataThe cleaning results are not satisfactory Installation Adjusting the level of the applianceWater inlet hose with safety valve Water connectionElectrical connection Drain hosePage