Zanussi ZDT 5053 manual Starting a washing programme, End of the washing programme

Page 12

Starting a washing programme

In this fully integrated appliance the controls are located on the top of the door. When selecting a washing programme, the door needs to be slightly open.

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Setting and starting the washing

programme

Press the On/Off button.

The END OF CYCLE indicator light flashes.

Press the programme selection/cancel button and select the desired washing programme. To choose the right washing programme see "Washing programmes" chart). Close the dishwasher’s door, the programme will start automatically.

NOTE: the start of the washing programme will occur only after the closure of the door. Until that moment it is possible to modify the selection made.

5. End of the washing programme

The dishwasher will automatically stop. An audible signal informs you of the end of the washing programme. Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

The END OF CYCLE indicator light is on.

The indicator light of the programme just ended is on. Switch off the dishwasher by pressing the On/Off button.

6. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

4. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

To interrupt a washing programme in progress

Open the dishwasher’s door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

To cancel a washing programme in progress

Open the dishwasher’s door. Press the programme selection/cancel button for about 3 seconds, until the indicator light of the running programme turns off and the END OF CYCLE indicator light flashes, indicating that the running programme has been cancelled and that the machine has returned to setting mode.

It is now possible to select another washing programme. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

NOTE: only during the drying phase, if the dishwasher’s door will be opened and remains open for more then 30 seconds, the running programme will be automatically cancelled and the machine will return to setting mode. This will happen, always only during the drying phase, also when the machine is switched off by pressing the On/Off button and remains switched off for more then 30 seconds.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Audible signals Programme indicator lightsDeactivation/activation of the audible signals Prior to using for the first time Setting manuallySetting electronically Water softenerAdjusting the dose Filling with dishwasher saltRinse aid Filling with rinse aidDaily use Loading cutlery and dishesLower basket Cutlery basketAdjusting the height of the upper basket Upper basketUse of detergent To move to the higher position proceed as followsDifferent kinds of detergent Detergent tabletsUse of 3 in 1 combi detergents Concentrated detergentWashing programmes Degree of soil Cycle description Consumption valuesType of load Quick 30 MINTo interrupt or cancel a washing programme in progress Starting a washing programmeEnd of the washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard guarantee conditionsEuropean Guarantee ExclusionsInstallation instructions Building-inLevelling Fixing to the adjacent unitsWater outlet hose connection Electrical connectionGreen and Yellow Earth Blue- Neutral Brown- Live Proceed as followsHints for test centres Cup racks position aPage Page Page From the Electrolux Group. The World’s No.1 choice

ZDT 5053 specifications

The Zanussi ZDT 5053 is a modern and efficient integrated dishwasher designed to elevate your kitchen experience. With its sleek design and innovative technology, it seamlessly blends into any kitchen décor while providing superior cleaning performance.

One of the standout features of the ZDT 5053 is its generous capacity. With room for up to 13 place settings, it is ideal for families or those who frequently entertain guests. The adjustable racks and tines provide flexible loading options, accommodating larger items such as pots, pans, and baking sheets without difficulty. This thoughtful design ensures that every dish, cutlery, and glass comes out sparkling clean.

Another key aspect of the Zanussi ZDT 5053 is its A+ energy efficiency rating. This not only helps to reduce your carbon footprint but also lowers energy bills, making it an environmentally friendly choice for conscientious consumers. The dishwasher combines performance with eco-friendly technology, ensuring that it uses water and electricity efficiently. The Eco Programme is specifically designed to reduce water and energy consumption, ensuring that you can maintain a sustainable kitchen without sacrificing performance.

The ZDT 5053 also boasts various wash programs tailored to meet different cleaning needs. Among these options are intensive wash cycles for heavily soiled pots and dishes, as well as quick wash settings for those times when you need clean dishes in a hurry. The quick 30-minute wash is particularly convenient for busy households, ensuring that you never run out of clean cutlery and plates during meal preparations or gatherings.

In terms of noise level, the Zanussi ZDT 5053 operates quietly, making it suitable for open-plan living spaces. The low noise output ensures that you can run the dishwasher at any time without disturbing your household activities.

Additionally, the dishwasher features a delay start option, allowing you to set the cleaning cycle to begin at a more convenient time. This adds flexibility to your daily routine, so you can take advantage of cheaper energy rates during off-peak hours if desired.

Overall, the Zanussi ZDT 5053 combines space, efficiency, and performance, making it an excellent choice for anyone looking to enhance their kitchen with a reliable dishwasher. Its combination of innovative features and energy-efficient operation ensures that it stands out in its class, bringing convenience and cleanliness to your home.
Top Page Image Contents