Zanussi ZDT 5053 manual Maintenance and cleaning, Cleaning the filters, Frost precautions

Page 13

Maintenance and cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash programme without dishes using detergent.

Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.

Cleaning the filters

The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result.

1.Open the door, remove the lower basket.

2.The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter (C).

Unlock the filter system using the handle on the microfilter, and remove.

3.Turn the handle about 1/4 a turn anticlockwise and remove.

4.Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B).

5.Clean all filters thoroughly under running water.

6.Remove the flat filter (C) from the base of the washing compartment and clean both faces thoroughly.

7.Put the flat filter (C) back in the base of the washing compartment.

8.Place the coarse filter (A) in the microfilter (B) and press together.

9.Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment.

Attention!

Under no circumstances may the dishwasher be used without filters.

Incorrect repositioning and fitting of the filters will produce poor washing results.

NEVER try to remove the upper spray arm.

If residues of soil have clogged the holes in the upper spray arm, remove them with a cocktail stick.

Prolonged periods of non-operation

If you are not using the machine for any period of time you are advised to:

1.Unplug the appliance and then turn off the water.

2.Leave the door ajar to prevent the formation of any unpleasant smells.

3.Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving house etc....):

1. Unplug it.

2.Turn the water tap off.

3.Remove the water inlet and discharge hoses.

4.Pull the machine out together with the hoses. Avoid over tilting the machine during transportation.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Programme indicator lights Audible signalsDeactivation/activation of the audible signals Setting manually Prior to using for the first timeSetting electronically Water softenerFilling with dishwasher salt Adjusting the doseRinse aid Filling with rinse aidLoading cutlery and dishes Daily useLower basket Cutlery basketUpper basket Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsDetergent tablets Different kinds of detergentUse of 3 in 1 combi detergents Concentrated detergentDegree of soil Cycle description Consumption values Washing programmesType of load Quick 30 MINStarting a washing programme To interrupt or cancel a washing programme in progressEnd of the washing programme Unloading the dishwasherCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Fault code appearsFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard guarantee conditions Guarantee ConditionsEuropean Guarantee ExclusionsBuilding-in Installation instructionsLevelling Fixing to the adjacent unitsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Proceed as followsCup racks position a Hints for test centresPage Page Page From the Electrolux Group. The World’s No.1 choice

ZDT 5053 specifications

The Zanussi ZDT 5053 is a modern and efficient integrated dishwasher designed to elevate your kitchen experience. With its sleek design and innovative technology, it seamlessly blends into any kitchen décor while providing superior cleaning performance.

One of the standout features of the ZDT 5053 is its generous capacity. With room for up to 13 place settings, it is ideal for families or those who frequently entertain guests. The adjustable racks and tines provide flexible loading options, accommodating larger items such as pots, pans, and baking sheets without difficulty. This thoughtful design ensures that every dish, cutlery, and glass comes out sparkling clean.

Another key aspect of the Zanussi ZDT 5053 is its A+ energy efficiency rating. This not only helps to reduce your carbon footprint but also lowers energy bills, making it an environmentally friendly choice for conscientious consumers. The dishwasher combines performance with eco-friendly technology, ensuring that it uses water and electricity efficiently. The Eco Programme is specifically designed to reduce water and energy consumption, ensuring that you can maintain a sustainable kitchen without sacrificing performance.

The ZDT 5053 also boasts various wash programs tailored to meet different cleaning needs. Among these options are intensive wash cycles for heavily soiled pots and dishes, as well as quick wash settings for those times when you need clean dishes in a hurry. The quick 30-minute wash is particularly convenient for busy households, ensuring that you never run out of clean cutlery and plates during meal preparations or gatherings.

In terms of noise level, the Zanussi ZDT 5053 operates quietly, making it suitable for open-plan living spaces. The low noise output ensures that you can run the dishwasher at any time without disturbing your household activities.

Additionally, the dishwasher features a delay start option, allowing you to set the cleaning cycle to begin at a more convenient time. This adds flexibility to your daily routine, so you can take advantage of cheaper energy rates during off-peak hours if desired.

Overall, the Zanussi ZDT 5053 combines space, efficiency, and performance, making it an excellent choice for anyone looking to enhance their kitchen with a reliable dishwasher. Its combination of innovative features and energy-efficient operation ensures that it stands out in its class, bringing convenience and cleanliness to your home.
Top Page Image Contents