Select Button, Cancel Button, Printer On Line | Oki 2024E instruction

Control Panel Buttons (cont.)

SELECT Button

Menu Mode

•Press to engage a new value for an Item (An asterisk appears next to the new setting).

•Press to initiate the action indicated on the display (e.g., print MenuMap).

Password (PIN) Mode

Press to enter the number 3 in the password.

CANCEL Button

Printer On Line

Press to delete a job being processed:

•If the job is being printed, it will be cancelled and deleted.

•If the job is still being received, it continues until all the data is received, then is deleted.

Menu Mode

Press to exit the Menu mode and place the printer back on line.

Password (PIN) Mode

Press to enter the number 7 in the password.

Error Mode (Attention light blinking)

Press to delete a job being processed. Once the job has been deleted, the printer will return to the original error status.

25

Image 26

Oki 2024E manual Select Button, Cancel Button, Printer On Line, Error Mode Attention light blinking

Contents

Page Contents Order Numbers Ordering Replacement SuppliesHow to Order Default Media Settings Media SettingsWhy Change Media Settings? Media Settings for Individual Print Jobs Ranges for Printer Media Weight Settings To Set Labels, Heavy Paper, etc., as Default Media Changing Default Media Settings Trays 1, 2To Set Transparencies as the Default Media Then, Set the Media Type Changing Default Media Settings Multi-Purpose MP TrayFirst, Check/Set the Media Size to Letter Default or A4 Then, Set the Media Weight Changing Default Media Settings Multi-Purpose TrayTo Set Labels or Heavy Paper as the Default Media First, Check/Set the Media Loading Media Trays 1, 2 Sizes must be defined in driver before printing Loading Media Multi-Purpose MP Tray Selecting/Using Paper Specifications Default Printing Transparencies Selecting/Using TransparenciesMaking Transparencies the Default Print Media For Individual Print Jobs on Transparencies Label Parameters Selecting/Using LabelsMaking Labels the Default Print Media for the MP Tray Printing Labels Parameters Selecting/Using Thick MediaSample Ream Label Printing Thick Paper Printing Envelopes Selecting/Using EnvelopesMaking Envelopes Default Print Media for MP Tray To Print an Individual Job on Envelopes Selecting/Using OKI Print Media Proof & Print Feature Ideas for Using Printer FeaturesSecure Print Feature Overlays Forms To Delete Document before Printing It To Print a Confidential Document Using Control PanelSecure Print To Print a Proofed Document Using Control Panel Proof & Print Printing the File List Printing the Menu Defaults MenuMapPrinting Built-In Reports Printing the Demo Printing Lists of Fonts Setting the Power Save Interval Setting Power Save ParametersPower Save To Disable/Enable Power Save On Line Button Control Panel ButtonsMenu Button Value + Button Item + ButtonItem Button Value Button Select Button Cancel ButtonError Mode Attention light blinking Printer On Line Control Panel Lights Ready LED Green Clearing Media Jams Jam Check Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside Jam 382 If the sheet is inside and caught in the fuser Open Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Off Changing Toner CartridgesToner Cartridge Order #s Back On Error Messages On Line Fuser is not properly installed Press the on Line button Additional OKI Resources Service & SupportFirst …