Selecting/Using Envelopes, Printing Envelopes | Oki 2024E instruction

Selecting/Using Envelopes

Specifications

Caution!

Envelopes must be able to withstand 446°F (230°C) for 0.2 second, including mechanical pressures to 25 psi (1.8 kg/cm2)

Important!

For the best print results, use only the recommended envelopes.

Never use envelopes with metal clasps, snaps, windows, or V-flap seals:

No!

	Size	Feed	Exit Tray	Media	Media	Recommended
	Size	Tray	Exit Tray	Type	Weight	Recommended
		Tray		Type	Weight

	COM-10	MP Tray	Rear Only	Any	Any	OKI 52206301
		Only		Setting	Setting	OKI 52206302
						OKI 52206302

Printing Envelopes

To Print an Individual Job on Envelopes

Make the following settings in the printer driver as you print the job:

•Source = MP Tray

•Size = COM-10

Making Envelopes the

Default Print Media for the

MP Tray

Set the printer menu to (see pages 5 and 6):

• PaperSize = COM-10

15

Image 16

Oki 2024E manual Selecting/Using Envelopes, Printing Envelopes, To Print an Individual Job on Envelopes

Contents

Page Contents How to Order Ordering Replacement SuppliesOrder Numbers Why Change Media Settings? Media SettingsDefault Media Settings Media Settings for Individual Print Jobs Ranges for Printer Media Weight Settings To Set Transparencies as the Default Media Changing Default Media Settings Trays 1, 2To Set Labels, Heavy Paper, etc., as Default Media First, Check/Set the Media Size to Letter Default or A4 Changing Default Media Settings Multi-Purpose MP TrayThen, Set the Media Type Changing Default Media Settings Multi-Purpose Tray To Set Labels or Heavy Paper as the Default MediaThen, Set the Media Weight First, Check/Set the Media Loading Media Trays 1, 2 Sizes must be defined in driver before printing Loading Media Multi-Purpose MP Tray Selecting/Using Paper Specifications Default Selecting/Using Transparencies Making Transparencies the Default Print MediaPrinting Transparencies For Individual Print Jobs on Transparencies Selecting/Using Labels Making Labels the Default Print Media for the MP TrayLabel Parameters Printing Labels Selecting/Using Thick Media Sample Ream LabelParameters Printing Thick Paper Selecting/Using Envelopes Making Envelopes Default Print Media for MP TrayPrinting Envelopes To Print an Individual Job on Envelopes Selecting/Using OKI Print Media Ideas for Using Printer Features Secure Print FeatureProof & Print Feature Overlays Forms Secure Print To Print a Confidential Document Using Control PanelTo Delete Document before Printing It To Print a Proofed Document Using Control Panel Proof & Print Printing Built-In Reports Printing the Menu Defaults MenuMapPrinting the File List Printing the Demo Printing Lists of Fonts Setting Power Save Parameters Power SaveSetting the Power Save Interval To Disable/Enable Power Save Menu Button Control Panel ButtonsOn Line Button Item + Button Item ButtonValue + Button Value Button Cancel Button Error Mode Attention light blinkingSelect Button Printer On Line Control Panel Lights Ready LED Green Clearing Media Jams Jam Check Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside Jam 382 If the sheet is inside and caught in the fuser Open Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Toner Cartridge Order #s Changing Toner CartridgesOff Back On Error Messages On Line Fuser is not properly installed Press the on Line button First … Service & SupportAdditional OKI Resources